Edge Grinding - Husqvarna 970 49 46-04 Operator's Manual

Edge grinding

This machine has edge grinding capabilities.
For edge grinding close to walls, the hatch on the right or
left side of the dust cover must be removed.
• Remove the screws (2) and the hatch. Fit the hatch on
to the holder.
• Under the hatch there is a removable guard to protect
the wall when grinding. The guard can be removed for
grinding closer next to the wall, 2 screws.
• Raise the foot pedal.
• Use your foot to give the wheels the right angle.
16 – English
OPERATING
• For edge grinding on the right side, the wheels must
be directed left.
• For edge grinding on the left side, the wheels must be
directed right.
• When the red marking on the wheel axle (A) is in line
with the red marking on the frame (B), the direction is
again straight.
A B