Network Setup - Q-See QSIPO26X Operation Manual

Network speed dome
Table of Contents

Advertisement

Network Setup

6.1.8
Click network button, the image is shown as in figure 6-10.
6.1.8.1 PPPoE Connection
Set PPPOE as on, and then please input "PPPoE name" and "PPPoE password" you
get from your ISP (Internet service provider).
After saving it, you need to restart to active your configuration.
After rebooting, network speed dome will connect to internet automatically. The IP in
the PPPoE IP is the dynamic value.
6.1.8.2 Web visit via PPPoE
There are two ways.
a. visit through current IP
After network speed dome connect with Internet by PPPoE, please go to figure 6-10
to get your device's current IP in " PPPoE IP" . Now you can visit this network speed
dome via this IP.
b. Visit via DNS
You need a PC of fixed IP in the internet and there is the DDNS software running in
this PC. In other words, this PC is a DNS (domain name server).
6-9
51

Advertisement

Table of Contents
loading

Table of Contents