Tour - Q-See QSIPO26X Operation Manual

、 U se left/right keys to highlight stop. Click ENTER to stop scanning.
Note: for versatile scan and random scan, you need
Corresponding protocols to support.
4.4.4

Tour

4.4.4.1 Tour setup
Use up/down keys to highlight add to tour. Input value in tour
group.
For example, here we want to add tour point 2 and 3 in tour
group 1.
• Firstly, input 1 in tour group.
• Secondly, input 2 to tour and then click ENTER. Now you have
added tour point 2 to tour group 1.
• Thirdly, input 3 to tour and then click ENTER. Now you have
added tour point 3 to tour group 1.
You can repeat the above procedures to add more tour point.
4.4.4.2 Tour operation
• Speed
Please use up/down keys to highlight tour setup.
When cursor is before speed, you can input speed value.
• Duration
Use left/right keys to highlight duration and then you can input
duration value.
• Begin touring
Use up/down to highlight tour and then input value. Now you can click
ENTER to begin tour.
• Stop touring
Move cursor to highlight stop and then click ENTER. Now you have
stopped touring
4.4.4.3 Remove
4.4.4.3.1 Remove tour
Move cursor to highlight remove tour and then input corresponding value. Click
ENTER to delete current tour.
4.4.4.3.2 Remove tour point
• Move cursor to highlight tour group and then input
corresponding value.
• Please click Enter to confirm all the operation below is
active to current tour group.
• Move cursor to highlight tour point and input
corresponding value (such as 2).
• Now click ENTER to delete.
For example, you want to remove tour point 5 and 6 in tour
group 2.
• Firstly, input 2 in tour group and click ENTER.
• Secondly, input 5 in tour point and click ENTER. Now you
have deleted tour point 5
Tour
Tour setup ＞ Tour group
Add to tour Tour ：
Tour Value ： 1
＞
Tour setup Speed
Tour Value ：
Tour setup ＞ Start
Add to tour Stop
Tour Value ： 1
Tour setup Speed
Add to tour duration
Remove tour ＞ Remove tour group
Tour
Tour setup ＞ tour group
Add to tour point Tour point
32
： 1
1
： 1
：