Preset - Q-See QSIPO26X Operation Manual

Iris is to adjust camera image brightness. Click right button near iris screen becomes
brighter while click left button near iris the screen becomes darker. You can use
these two buttons to get ideal
Iris is in auto mode after initialization, dome pan or tilt movement or zoom in, zoom
out.
In auto mode, camera can automatically responds to the light change to output
stable and vivid image.

5.4.4 Preset

Preset is to memorize current dome pan, tilt, focus and etc for future use.
This series network speed dome support 80 presets.
Note:
Preset name can be modified.
System supports multiple languages such as simplified Chinese, English.
5-12
Auto tour is a build-in function of this series dome.
You can add presets into a tour in a desired order and then set dwell time for each
preset. The dome will begin an auto touring between these presets.
Each tour can maximum consists of 80 presets.
Select tour number.
Input preset number and then click "add
tour no "button to add current preset into
tour.
In figure 5-12, input tour number in No.
column. Click auto tour button. System
begins touring.
5-13
Move PTZ to your desire start location.
In figure 5-9, click set button. Then you
presets.
can go on setting other
In figure 5-8, click page change button,
system goes to figure 5-12. Input preset
number and click preset button, you can
call up preset now.
40