Table of Contents
Advertisement
You can click you mouse in the detection region to set motion detection area. The
blue area is the motion detection zone.
• Channel: here is for you to select channel number.
• Delay time: system delays specified time you have set after alarm is cancelled.
• Sensitivity: here you can set area sensitivity.
• State: there are two modes: on/off.
Note:
This function is nor available in current version.
6.1.6 Alarm
Click alarm button you can see an image is shown as in figure 6-8.
• Record channel
• Record Channel
• Time
Y ou can set two periods here.
：
6-7
Y ou can draw a
in the check box to activate this function.
：
√
Y ou can draw a
in the check box to activate this function.
：
√
49
Advertisement
Table of Contents
