Table of Contents
Advertisement
Step 1 Pole bracket combination
Use slotted screwdriver to open three straps of the pole and connect them through
the bracket holes.
Step 2 Corner bracket installation
Connect control cable, video cable, power cable and network cable through the
bracket centre hole. Get the three straps to fasten the column object and screw the
bolts firmly. Wipe glass glue (not supplied) at the string holes to enhance waterproof
ability.
Step 3－ － － － Fitting installation
Screw four hex bolts through wall mount bracket and plastic gasket into pole mount
bracket. (Between screw and bracket, please add a spring gasket). Fasten the wall
mount bracket firmly on the pole mount bracket.
Note: when screw bolts, please fasten the spring gasket and then turn half a circle.
In this way, you can fasten plastic gasket to get sound airproof ability and at the
same time to avoid screw damage.
24
Advertisement
Table of Contents
