Attaching Roll Over Box Blade To Tractor - Bush Hog RO-840 Operator's Manual

IMPORTANT: Scan this QR Code with your smart phone to link to the PAMI Safe
Implement Hitching Manual for more information on correctly connecting
agricultural tractors to implements. Or type in your internet browser the following
web address: www.algqr.com/hme

6.2 Attaching Roll Over Box Blade to Tractor

The implement should be placed on level ground.
Place the tractor rockshaft control in 'position control (non-floating)' for attaching and detaching the implement.
'Draft control' or 'position control' can be used while operating.
Back the tractor until the ends of the lift arms can be attached to the lift points on the implement. Secure the lift
arms to the mast.
Attach the center link to the top of the mast and adjust so that the frame will be level in the operating position.
ROLL OVER BOX BLADE 09/20
© 2020 Alamo Group Inc.
OPERATION
Ops-0008-MISC
Operation Section 3-9