AT&T EL52206 User Manual page 59

Answering system
Answering system settings
To record a new announcement:
Press MENU/
1.
2. Press CID or DIR to scroll to Answering sys, then press
/SELECT to select Announcement. The system announces, "To
3. Press
MENU
play, press 2. To record, press 7."
Press 7. The system announces "Record after the tone. Press 5 when you are
4.
done."
5. Face the handset and speak towards the microphone to
record your announcement.
Press 5 when you finish the recording. The handset plays
6.
back the recorded announcement.
NOTE: If the answering system memory is full, when you press 7 in Step 4, the answering
system announces, "Memory is full." You must delete some messages before you can record
a new announcement. Refer to Message playback on pages 64-66.
To delete an announcement:
1. Press MENU/
Press CID or DIR to scroll to Answering sys, then press
2.
/SELECT to select Announcement. The system announces, "To
3. Press
MENU
play, press 2. To record, press 7."
Press 2 to play the current announcement from the speakerphone.
4.
Press 3 during playback to delete your recorded announcement. The
5.
system announces, "Announcement deleted."
If your announcement is deleted, calls are answered with the default
announcement, "Hello. Please leave a message after the tone."
when the handset is idle.
SELECT
when the handset is idle.
SELECT
53
/SELECT.
MENU
Recording... Stop
[5]
ECO
/SELECT.
MENU