Related Manuals for AT&T EL52359
Summary of Contents for AT&T EL52359
- Page 1 User’s manual EL52209/EL52259/ EL52309/EL52359/EL52409 DECT 6.0 cordless telephone/ answering system with caller ID/call waiting...
- Page 2 . In Canada, dial Model #: EL52209 (two handsets) EL52259 (two handsets) EL52309 (three handsets) EL52359 (three handsets) EL52409 (four handsets) Type: DECT 6.0 cordless telephone/answering system Serial #: (found on the bottom of the telephone base) Purchase date: Place of purchase: Both the model and serial number of your AT&T product can be found on the...
- Page 3 ID/call waiting Cordless handset User’s manual Quick start guide (2 for EL52209) (2 for EL52259) (3 for EL52309) (3 for EL52359) (4 for EL52409) Charger for cordless handset with power adapter installed (1 for EL52209) (1 for EL52259) Telephone base...
- Page 4 User’s manual EL52209/EL52259/ EL52309/EL52359/EL52409 DECT 6.0 cordless telephone/ answering system with caller ID/call waiting Table of contents Getting started Temporary ringer silencing...19 Quick reference guide - handset ..1 Ending a call ........19 Auto off ..........19 Quick reference guide - telephone base..............
- Page 5 Information about caller ID with Appendix B call waiting........... 31 Handset display screen messages46 Caller ID operation ......32 Appendix C Memory match ........32 Troubleshooting........48 Missed (new) calls indicator ..32 Appendix D Caller ID history ........33 Maintenance ..........56 How the caller ID history (call log) Appendix E works............
- Page 6 Getting started Quick reference guide - handset CID/VOLUME Press CID to show caller ID Charge light information (page 33) when the The charge light will be on when phone is not in use. the handset is charging (page Press to scroll down while in menus (page 9).
- Page 7 Getting started Quick reference guide - telephone base VOICEMAIL indicator IN USE indicator Flashes when you have new voice mail. Voice On when the handset is mail service is offered in use or when the by your local telephone answering system is company, and is answering an incoming different from answering...
- Page 8 Getting started Installation See page 5 You must install and charge the for easy STOP! handset battery before using the instructions. cordless handset. Install the telephone base close to a telephone jack and a power outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (see page 7).
- Page 9 Getting started Telephone base & charger installation Install the telephone as shown below. The telephone base is ready for table use. If you want to change to wall mounting, see page 7 for details. 5. Plug the other end of the telephone If you have DSL high speed Internet service a DSL filter line cord into a...
- Page 10 Getting started Battery installation & charging Install the battery as shown below. After installing the battery, you might be able to make and receive short calls. For best performance, charge the handset for at least 16 hours before use. When not in use, place the handset in the telephone base or charger.
- Page 11 Getting started Battery installation & charging Step 3 Step 2 Step 1 Charge the handset by Align the cover flat Plug the battery securely placing it face up in the against the battery into the connector inside telephone base or compartment, then the handset battery charger.
- Page 12 Getting started Wall installation Your telephone base is ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall bracket to connect with a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronic retailers.
- Page 13 Getting started Wall installation Wall to tabletop installtion 1. If the telephone line cord and power adapter cord are bundled, unite them first. 2. Push the telephone base down to detach it from the black plastic wall bracket. Unplug the telephone line cord (or DSL filter) from the wall. Unplug the power adapter from the power outlet.
- Page 14 Handset settings Telephone settings Use the menus to change the telephone’s settings. 1. Press MENU/ in idle mode (when the phone is not in use) to enter SELECT the main menu. ?BOT/!TZTUFN 2. Use CID or DIR to scroll to the feature to be EJSFDUPSZ changed.
- Page 15 Handset settings Telephone settings Ringer tone This feature allows you to choose one of 10 ringer tones. ?SJOHFS!UPOF 1. Press MENU/ in idle mode to enter the main SELECT LFZ!UPOF menu. 2. Use CID or DIR to scroll to RINGER TONE, then press /SELECT.