Find Handset - AT&T EL52206 User Manual

Telephone operation

Find handset

You can use the find handset feature to find
misplaced handsets.
To start the paging tone:
• Press FIND HS on the telephone base to start the
paging tone on all handsets for 60 seconds.
To stop the paging tone:
PHONE/
• Press
OFF/
CANCEL
on the handset(s).
-OR-
FIND HS on the telephone base.
• Press
-OR-
• Place the handset in the telephone base or charger.
NOTES:
If you press MUTE/
•
tone continues on the other handsets.
• If a handset is accessing the answering system, on a call (intercom call or outside call), or out
of range, that handset does not beep when paged.
• You cannot use the find handset feature while the telephone base is playing messages or the
answering system is being accessed remotely.
/SPEAKER,
,
FLASH
or any dialing key (0-9, or )
on a handset, the ringer of that handset is silenced but the paging
DELETE
28