RADEMACHER RolloTron Swivel Winder Standard DuoFern 2510 Translation Of The Original Operating And Assembly Manual page 89

i
18. Removing the RolloTron Swivel Winder Standard DuoFern (e.g. in the event of a move)
8.
Remove the reel compartment cover and check the
position of the fastening hook.
9.
If necessary, move the fastening hook into an easily
accessible position.
9.1
For this, plug the mains cable into the RolloTron Swivel
Winder Standard DuoFern and into the socket.
There is a risk of injury from the reel.
◆ Never reach into the reel compartment when the
motor is running.
◆ Always remove the mains plug before touching the
reel compartment.
10.
Finally, remove the mains plug again from the socket.
11.
Release the belt from the fastening hook and pull it out
of the RolloTron Swivel Winder Standard DuoFern from
above.
12.
Finally, unscrew the wall bracket.
CAUTION!
EN
89