RADEMACHER RolloTron Swivel Winder Standard DuoFern 2510 Translation Of The Original Operating And Assembly Manual page 77

13. End point adjustment
Set the lower end point
3.
+ Simultaneously press and hold the
buttons.
(red) The roller shutter travels downwards
and the indicator light flashes red.
4.
+ Release the buttons, as soon as the roller
shutter reaches the desired position for
the lower end point.
The roller shutters stop and the lower
end point is stored.
Changing or correcting the end points
5.
Move the roller shutters to the centre position and
configure the respective end point again.
i
Please ensure that the belt is not excessively
slack when reaching the lower end point.
After a period of time it may be necessary to
i
reconfigure the end points as the belt may
elongate during the process of operation.
EN
77