Logging Off Duofern Transmitters - RADEMACHER RolloTron Swivel Winder Standard DuoFern 2510 Translation Of The Original Operating And Assembly Manual

Electronic roller shutter belt winder rollotron swivel winder standard duofern
Table of Contents

Advertisement

Available languages

Available languages

15.2 Logging off DuoFern transmitters

1.
+
Activate the logout mode.
Simultaneously press and hold the but-
tons for 4 seconds.
(red)
The indicator light flashes red.
The logout mode remains active for
approx. 60 seconds.
2.
Switch the DuoFern transmitter to the logout mode
(please refer to the relevant instruction manual).
3.
Pay attention to the indicator light.
flashes red
Logout mode is active.
green light (5 seconds)
Log off was successful.
red light (5 seconds)
Registration failed if:
◆ An attempt was made to log-off
a DuoFern transmitter that is not
logged-on.
4.
Log off the next DuoFern transmitter.
For this, repeat points 1 to 2 or terminate the log-off.
Cancelling the logging off process
You can cancel the logging off process at any
time by briefly pressing the DuoFern button.
EN
81

Advertisement

Chapters

Table of Contents
loading

Table of Contents