RADEMACHER RolloTron Swivel Winder Standard DuoFern 2510 Translation Of The Original Operating And Assembly Manual page 55

i
3. Safety instructions
Exceeding the maximum permissible running time
(KB) may overload and damage the RolloTron Swivel
Winder Standard DuoFern.
◆ The maximum permissible running time for a cycle
may not be exceeded when the equipment is in op-
eration. For this reason, the RolloTron Swivel Winder
Standard DuoFern has an automatic running time
limit (KB) of four minutes.
◆ If the running time limit is triggered, then the
RolloTron Swivel Winder Standard DuoFern must
be left for at least 12 minutes to cool down. During
this period, the indicator light flashes rapidly. Full
operational availability is re-established after approx.
one hour.
According to DIN EN 13659, it is necessary to determine
that the movement conditions for the shutters are main-
tained in accordance with EN 12045.
◆ The displacement must be of at least 40 mm on the
lower edge in the rolled-out position with a force of
150 N in the upwards direction.
◆ In doing so, it must be ensured that the extending
speed of the shutters for the final 0.4 m is less than
0.15 m/s.
EN
55