Automatic Operation - RADEMACHER RolloTron Swivel Winder Standard DuoFern 2510 Translation Of The Original Operating And Assembly Manual

16. Automatic operation

AUTO
The RolloTron Swivel Winder Standard DuoFern sup-
ports the following automatic functions:
◆ Automatic timer
◆ Automatic dusk function
◆ Automatic dawn function
◆ Automatic solar function
The automatic functions must be activated first in
the DuoFern controller
The automatic functions are only available if the
RolloTron Swivel Winder Standard DuoFern is operated
with a DuoFern controller (e.g. DuoFern central operating
unit, HomePilot, etc.), see page 80, and the functions
were activated in said DuoFern controller.
Note for switching the automatic functions on/off
All of the automatic functions can be switched on and
off together on the RolloTron Swivel Winder Standard
DuoFern, see page 85.
i Once automatic functions are deactivated, it is
only possible to operate the system manually.
Automatic timer
Execution of control signals from the DuoFern
network
If the automatic timer is activated, control signals for
opening and closing times will be received from the
DuoFern network and executed by the system.
Executing a closing command
The DOWN command in the DuoFern network causes
the roller shutters to close to their lower end point or
to the configured ventilation position, see page 84.
Executing a random function
If the RolloTron Swivel Winder Standard DuoFern receives
a control signal from a DuoFern transmitter with activat-
ed random function (e.g. from a HomePilot®), then it is
also able to execute the random function. The random
function enables a random delay of up to 30 minutes.
i
The random function cannot be switched
on/off on site.
EN
83