Table of Contents
Advertisement
Steps
Align and insert the solid-state drive holder on the system board to accommodate the M.2 2230 solid-state drive.
Next steps
1. Install the
base
cover.
2. Install the
microSD
card.
3. Install the
SIM
card.
4. Follow the procedure in
Installing the M.2 2230 solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE:
You can refer the below procedure to install the M.2 2230 solid-state drive in both SLOT 1 and SLOT 2.
NOTE:
SLOT1 supports only PCIe Gen4 Solid-state drive and does not support any Intel Optane.
NOTE:
SLOT2 supports only PCIe Gen3 Solid-state drive and Intel Optane.
The following image indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the
installation procedure.
Figure 7. M.2 2230 solid-state drive without bracket
after working inside your
computer.
Removing and installing components
33
Advertisement
Table of Contents
