Table of Contents
Advertisement
Steps
1. Align and place the smart card reader on the palm-rest assembly.
2. Replace the two (M2x3) screws that secure the smart card reader to the palm-rest assembly.
3. Connect the smart card reader cable to the connector on the USH board.
Next steps
1. Install the
assembly inner
2. Install the
3-cell battery
3. Install the
WWAN
card.
4. Install the
WLAN
card.
5. Install the
base
cover.
6. Install the
microSD
card.
7. Install the
SIM
card.
8. Follow the procedure in
72
Removing and installing components
frame.
or
4-cell
battery.
after working inside your
computer.
Advertisement
Table of Contents
