Table of Contents
Advertisement
Installing the system fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the system fan and provide a visual representation of the installation procedure.
Steps
1. Align the screw holes on the system fan with the screw holes on the palm-rest assembly.
2. Replace the two (M2x3) screws to secure the system fan to the palm-rest assembly.
3. Connect the system-fan cable to the connector on the system board.
Next steps
1. Install the
3-cell battery
2. Install the
base
cover.
3. Install the
microSD
card.
4. Install the
SIM
card.
5. Follow the procedure in
or
4-cell
battery.
after working inside your
computer.
Removing and installing components
53
Advertisement
Table of Contents
