Table of Contents
Advertisement
Steps
1. Align and place the keyboard assembly on the palm-rest assembly.
2. Replace the twenty-six (M2x2) screws that secure the keyboard assembly to the palm-rest assembly.
3. Close the plastic tapes to cover the keyboard assembly screws.
4. Connect the backlight cable and the keyboard cable to the connector on the touchpad.
Next steps
1. Install the
system
board.
NOTE:
The system board can be installed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
2. Install the
assembly inner
3. Install the
system
fan.
4. Install the
3-cell battery
5. Install the
WWAN
card.
6. Install the
WLAN
card.
7. Install the
base
cover.
8. Install the
microSD
card.
9. Install the
SIM
card.
10. Follow the procedure in
frame.
or
4-cell
battery.
after working inside your
computer.
Removing and installing components
75
Advertisement
Table of Contents
