Table of Contents
Advertisement
Steps
1. Align the screw holes on the heat sink with the screw holes on the system board.
2. Tighten the seven captive screws to secure the heat sink to the system board.
3. Replace the (M2x3) screw to secure the heat sink to the palm-rest assembly.
Next steps
1. Install the
3-cell battery
2. Install the
base
cover.
3. Install the
microSD
card.
4. Install the
SIM
card.
5. Follow the procedure in
58
Removing and installing components
or
4-cell
battery.
after working inside your
computer.
Advertisement
Table of Contents
