Dell Latitude 5530 Service Manual page 116

Table 15. System setup options—System Management menu (continued)
System Management
Wake on LAN
Wake on LAN
Auto on Time
Table 16. System setup options—Keyboard menu
Keyboard
Numlock Enable
Fn Lock Options
Keyboard Illumination
Keyboard Backlight Timeout on AC
Keyboard Backlight Timeout on
Battery
Device Configuration Hotkey Access
Table 17. System setup options—Pre-boot Behavior menu
Pre-boot Behavior
Adapter Warnings
Enable Adapter Warnings
Warning and Errors
Fastboot
Extend BIOS POST Time
MAC Address Pass-Through
116 BIOS setup
By default, the option is disabled.
Enable or disable the computer to power on by special LAN signals when it
receives a wakeup signal from the WLAN.
By default, the Disabled option is selected.
Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
Enable or disable the Numlock function when the computer boots.
By default, the option is enabled.
By default, the Fn lock option is enabled.
Enables to change the keyboard illumination settings.
By default, the Bright option is enabled.
Set the timeout value for the keyboard backlight when an AC adapter is
connected to the computer.
By default, the 10 seconds option is enabled.
Set the timeout value for the keyboard backlight when the is running only on
battery power.
By default, the 10 seconds option is enabled.
Manages whether you can access device configuration screens through
hotkeys during computer startup.
By default, the option is enabled.
Enable or disable the warning messages during boot when the adapters with
less power capacity are detected.
By default, the option is enabled.
Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
Enable to set the speed of the boot process.
By default, the Minimal option is enabled.
Set the BIOS POST time.
By default, the 0 seconds option is enabled.
Replaces the external NIC MAC address with the selected MAC address from
the computer.
By default, the System Unique MAC Address option is enabled.