Table of Contents
Advertisement
AC Power System
(Cisco PID NCS-PDU-WYE) power interface, and has power input and power output cords entering and
exiting the box.
Figure 4: Cisco NCS-PDU
1
Rack mounting ears
2
Rack tray
3
Input cord
For detailed information on AC PDUs, see the
Guide.
Mounting the PDU
The AC PDU mounting bracket holds two AC PDUs. The mounting bracket can be attached to both sides of
the FCC by using the existing screws that hold the side panels on
the Side of the
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
6
FCC). The PDUs are attached to the mounting brackets with four M5 screws per AC PDU.
4
Output cord
5
Two PDUs
Cisco CRS 3-Phase AC Power Distribution Unit Installation
(Figure 5: AC PDU Bracket Attached to
Installing the Power Components
Advertisement
Table of Contents
