Table of Contents
Advertisement
Installing the Fabric Card Chassis Ground Cable
Steps
To attach the ground cable to the FCC, follow these steps:
Step 1
Use the crimping tool mandated by the lug manufacturer to crimp the lug to the ground cable.
Step 2
Use the socket wrench to attach the lug and ground cable to one the NEBS grounding point
and Grounding Points—Rear Side of the FCC
Figure 3: Attaching the Ground Cable to a NEBS Bonding and Grounding Point
Step 3
Use the torque wrench to tighten the bolts to a torque of 30 in-lb (3.39 N-m).
Step 4
Connect the other end of the ground cable to a grounding point at your site, according to site requirements.
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
4
).
Installing the Power Components
(Figure 1: NEBS Bonding
Advertisement
Table of Contents
