Setting The Occupancy Schedule - Daikin BACnet Series Installation Manual

Setting the Occupancy Schedule

The schedule in the BACnet™ Thermostat controls the occupancy
mode. If the schedule is set to ON, the BACnet Thermostat uses the
occupied setpoint as the active setpoint. If the schedule is OFF, the
unoccupied setpoint is used.
NOTE: The schedule in the BACnet Thermostat is a BACnet schedule
object. If the BACnet Thermostat is connected to a BACnet
network the schedule can be set up with a BACnet
operator workstation.
Setting the occupancy schedule requires entering Password 2.
Table 10: Setting the Occupancy Schedule
Procedure
Starting display
Select the SCHEDULE menu
Choose and set a weekly schedule
Choose and set a holiday schedule
IO-DAPPS
Steps
1. Start at the temperature display.
2. Enter Password 2. The display changes to the MAIN menu display.
1. From the MAIN menu, press either the ▲ or ▼ button to
select SCHEDULE.
2. Press Enter. The SCHEDULE menu opens.
1. From the SCHEDULE menu, choose one of the following schedule
entry methods to enter a weekly schedule.
• ENTIRE WEEK – Sets the schedule for all seven days of the week
at one time
• WEEKDAYS – Sets the schedule for Monday to Friday. Saturday
and Sunday are not changed
• WEEKEND – Sets the schedule for Saturday and Sunday. Monday
to Friday remain unchanged
• INDIVIDUAL DAYS – Sets the schedule for just the selected day
of the week
2. Change the daily times and values in the schedule to set the
occupancy mode to either ON or OFF.
• When finished with each pair push Enter or Done
• When finished with the schedule push Exit to return to the
SCHEDULE menu.
Use a holiday schedule to override the values in the weekly schedule.
Months and years can be entered as follows:
• To choose ANY as the year, select the year and push the down
arrow past the current year.
• For month, the choices are any of the twelve months of the year,
ANY, EVEN, and ODD.
1. From the SCHEDULE menu, choose HOLIDAYS.
2. From the HOLIDAYS list, choose a holiday to edit.
3. From the menu for the holiday, choose
• DATE – Enter a single date on which the holiday schedule will
override the values of the weekly schedule
• DATE RANGE – Enter a range of dates on which the values and
times listed in the holiday schedule will override the values of
the weekly schedule
• WEEK N DAY – A day of the week and month on which the values
and times listed in the holiday schedule will override the values
of the weekly schedule.
www.daikinac.com
Program Set-Up
Display
17