Mo-vis Foot Control Omni Installation Manual page 24

SETTING
Debounce The input button has to be pressed
timer for longer than the debounce timer,
before it is seen as an input. It can
be useful to increase this timer, in
case the user has a tremor.
Auditive feedback
SETTING
Error/warning
beep
Road compensa-
tion beep
Movement beep
Foot Control Installation manual
DESCRIPTION
DESCRIPTION
When the control goes into error or
warning, it will show the flash code
on the LED (seeError codes on page
28 ) . With this setting, you can
choose to also hear it via the buzzer.
This parameter is only relevant, when
you have set Road Compensation to
manual. In that case, a sound will be
heard when the road compensation
is enabled/disabled.
• Enabled: 1 short beep
• Disabled: 2 short beeps
This parameter is only relevant, when
you have set Road Compensation
to manual. In that case, a sound
will be heard to indicate when the
(de)activation pattern is stopped or
when a wrong pattern is executed.
This will let the user know that the
wheelchair will start to move.
PARAMETERS
50 mS
2500 mS
10 mS
PARAMETERS
Off No beep when in
error/warning
On Beep sounds the
flash code when in
error/warning(see
Error codes on
page 28
Off No beep when
road compensation
is enabled/disabled
On
Short beep(s) when
the road compen-
sation is enabled/
disabled
Off No beep when
road compensation
(de)activation pat-
tern is cancelled
On Long beep when
road compensation
(de)activation pat-
tern is cancelled
Min./Default
Max.
Step
)
23