Configuration; Software Download; Defining Parameter Settings; Parameter Settings - Mo-vis Foot Control Omni Installation Manual

Configuration

WARNING: Changes in parameter settings may cause damage to the device or power
chair, or may cause injury to people.
CAUTION:
Always change parameters and test the outcome without anyone sitting in
the power chair.

Software download

• You can download the Configurator Software on our website
• Software requirement: Windows version 10 or 11, 64 bit
• For all details on how to install and use the software, we refer you to the Configurator
Software manual.
• To configure the parameters of the device, you need dealer level access. This level is
password-protected. Contact mo-vis to obtain the password.
NOTE:
Never share your password with anyone and keep access to the Configurator
Software strictly personal.

Defining parameter settings

1 Connect the device to a PC. Use a standard USB-C cable.
CAUTION:
the connections are not used, always put or keep the protective covers in.
2 Configure the parameters with the software.
3 Upload the configuration.
4 Test the configuration and adjust if necessary.

Parameter settings

Compensation settings
Road Compensation is a unique feature in the mo-vis joysticks. When you are driving on
an uneven road with a special control mounted in a tray, or on an arm (or any other place
where tremblements may be amplified), it can be very difficult to maintain control over
the electric wheelchair and sometimes even unsafe. You can make this easier and safer, by
enabling the Road Compensation.
Foot Control Installation manual
Before inserting a jack or USB cable, remove the protective cover. If
http://www.mo-vis.com
17