Deleting An Alarm; Using The Stopwatch; Starting The Countdown Timer; Syncing The Time With Gps - Garmin 010-02701-12 Owner's Manual

Deleting an Alarm

1 Hold .
2 Select Clocks > Alarms.
3 Select an alarm, and select Delete.

Using the Stopwatch

1 Hold .
2 Select Clocks > Stopwatch.
3 Press to start the timer.
4 Press to restart the lap timer.
The total stopwatch time continues running.
5 Press to stop the timer.
6 Select an option:
• To reset the timer, swipe down.
• To save the stopwatch time as an activity, swipe up, and select Save.
• To review the lap timers, swipe up, and select Review Laps.
• To exit the stopwatch, swipe up, and select Done.

Starting the Countdown Timer

1 Hold .
2 Select Clocks > Timer.
3 Enter the time, and select
4 Press .

Syncing the Time with GPS

Each time you turn on the watch and acquire satellites, the watch automatically detects your time zones and the
current time of day. You can also manually sync the time with GPS when you change time zones and to update
for daylight saving time.
1 Hold .
2 Select Clocks > Time > Time Sync.
3 Wait while the watch locates satellites

Setting the Time Manually

By default, the time is set automatically when the Venu Sq 2 watch is paired with a phone.
1 Hold .
2 Select Clocks > Time > Time Source > Manual.
3 Select Time, and enter the time of day.
Clocks
.
(Acquiring Satellite Signals, page 59).
51