CF MOTO UFORCE 1000XL Owner's Manual
  1. Manuals
  2. Brands
  3. CF MOTO Manuals
  4. Offroad Vehicle
  5. UFORCE 1000XL
  6. Owner's manual

CF MOTO UFORCE 1000XL Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

UFORCE
1000/1000XL
CF1000UU / CF1000UZ / CF1000UU-2/ CF1000UZ-2
OWNER'S MANUAL
READ THIS
MANUAL
CAREFULLY.
It contains important
safety information.
This ROV should not be ridden by
anyone under 16 years of age.
Passenger under 12 are prohibited.

Advertisement

Table of Contents
loading

Related Manuals for CF MOTO UFORCE 1000XL

Summary of Contents for CF MOTO UFORCE 1000XL

  • Page 1 UFORCE 1000/1000XL CF1000UU / CF1000UZ / CF1000UU-2/ CF1000UZ-2 OWNER'S MANUAL It contains important This ROV should not be ridden by READ THIS safety information. anyone under 16 years of age. MANUAL Passenger under 12 are prohibited. CAREFULLY.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Foreword Foreword ..........................................1 1 Welcome Welcome ..................................................1 1 EVAP System (Evaporative Emission Control System) EVAP System (Evaporative Emission Control System) ...................... 2 2 Catalytic Converter Catalytic Converter ............................................2 2 Signal Words Signal Words ........................
  • Page 3 How To Avoid CVT Drive Belt and Component Failure How To Avoid CVT Drive Belt and Component Failure ....................73 Dashboard Indicators and Warnings Dashboard Indicators and Warnings ................................75 Dashboard Indicators and Warnings Dashboard Indicators and Warnings ................................
  • Page 4 Break-In Maintenance Checklist Break-In Maintenance Checklist ..................................123 Periodic Maintenance Schedule Periodic Maintenance Schedule ..................................125 Maintenance Procedures Maintenance Procedures ......................................132 Cleaning and Storage Cleaning and Storage .................................. 164 Transporting the Vehicle Transporting the Vehicle ......................................

  • Page 5: Welcome Welcome

    FOREWORD Foreword Welcome Thank you for purchasing a CFMOTO vehicle, and welcome to our world-wide family of CFMOTO enthusiasts. Be sure to visit us online at www.cfmoto.com for the latest news, new product introductions, upcoming events, and more. CFMOTO is an international company that specializes in the development, manufacture, and marketing of all-terrain vehicles, utility vehicles, large displacement motorcycles, and their core components.

  • Page 6: Evap System (Evaporative Emission Control System) Evap System (Evaporative Emission Control System)

    FOREWORD WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. EVAP System (Evaporative Emission Control System) (If equipped) When required by environmental emissions regulations, this vehicle is manufactured with a fuel evaporation system (EVAP) to prevent fuel vapors entering the atmosphere from the fuel tank and fuel system.

  • Page 7: Signal Words Signal Words

    FOREWORD Signal Words A signal word calls attention to a safety message or messages, a property damage message or messages, and designates a degree or level of hazard seriousness. The standard signal words in this manual are WARNING, CAUTION and NOTE or NOTICE. The following signal words and symbols appear throughout this manual and on your vehicle.
  • Page 8 FOREWORD NEVER: • Operate without proper training or instruction. Operate on public roads. A collision can occur with another vehicle. • Operate on paved roads. Pavement may seriously affect handling and control. • Operate at speeds too fast for your skill, conditions, or the terrain. •...
  • Page 9 FOREWORD READ THE OWNER’S MANUAL FOLLOW ALL INSTRUCTIONS AND WARNINGS WARNING Read, understand, and follow all of the instructions and safety precautions in this manual and on all product labels. Failure to follow the safety precautions could result in serious injury or death. WARNING The engine exhaust gas from this product contains CO, which is deadly gas and could cause headaches, giddy, or lose consciousness, even death.

  • Page 10: Introduction Introduction

    INTRODUCTION Introduction Thank you for purchasing a CFMOTO vehicle, and welcome to our world-wide family of CFMOTO enthusiasts. For safe and enjoyable operation of your vehicle, be sure to follow the instructions and recommendations in this owner’s manual. Information about major repairs are outlined in the CFMOTO Service Manual, and should only be performed by a CFMOTO service dealer and technician.
  • Page 11 INTRODUCTION Vehicle Identification Numbers and Key Information Record your vehicle’s identification numbers in the spaces provided. Remove the spare key and store in a safe place. Your key can be duplicated only by mating a key blank with one of your existing keys. If both keys are lost, the complete lock assembly must be replaced.

  • Page 12: Uforce 1000 Uforce 1000

    SPECIFICATIONS UFORCE 1000 Item UFORCE 1000 UFORCE 1000 XL Overall Length 115.9 in. (2945 mm) Overall Width 63.6 in. (1615 mm) Overall Height 72.8 in. (1850 mm) Wheel Base 80.7 in. (2050 mm) Ground Clearance 11 in. (280 mm) Min. turning radius 161.4 in.
  • Page 13 SPECIFICATIONS Item UFORCE 1000 UFORCE 1000 XL Bore × Stroke 3.5 in.x 2.91 in. (91 mmx 74 mm) x 2 962.6 mL Displacement 10.6:1 Compression Ratio Starting Type Electric start Lubrication Type Pressure / Splash lubrication Engine Oil: Type SAE 10W-40 / SAE 5W-40 / SAE 15W-40 (See page 84 for oil viscosity chart) Engine Oil Volume: 2.73 qt.
  • Page 14 SPECIFICATIONS Item UFORCE 1000 UFORCE 1000 XL Rear Differential Oil: SAE80W/90GL-5 Type Volume: 13.5 oz. (400 mL) Periodic Oil Change Front Differential Oil: SAE80W/90GL-5 Type Volume 11.1 oz. (330 mL) Periodic Oil Change Air Filter Paper type Fuel Type 89 or higher unleaded gasoline Fuel Tank Capacity 10.6 gallons (40 L) Fuel Reserve Amount At Fuel Gauge ‘Flash’...
  • Page 15 SPECIFICATIONS Item UFORCE 1000 UFORCE 1000 XL DCPR8E (NGK) Spark Plug Type Spark Plug Gap .031in ~ .035in. (0.8mm~0.9mm) CVT + Gearbox Transmission Gear Shift/Order Manual / L—H—N—R—P CVT Ratio 0.70~2.88 Engine Brake System Australia Market Only Transmission (EBS) Low Gear 43/17=2.529 Gear Ratio High Gear...
  • Page 16 SPECIFICATIONS Item UFORCE 1000 UFORCE 1000 XL Tire Pressure: Front 10 PSI (70 kPa) 14 PSI (100 kPa) Rear 14 PSI (100 kPa) 17 PSI (120 kPa) Air pressure for full load and high speed: Front 17 PSI (120 kPa) 17 PSI (120 kPa) Rear 22 PSI (150 kPa)
  • Page 17 SPECIFICATIONS Item UFORCE 1000 UFORCE 1000 XL Shock Absorber: Front Shock Absorber Coil spring/Oil dampened Rear Shock Absorber Coil spring/Oil dampened Wheel Travel: Front Wheel Travel 9.1 in. (230 mm) Rear Wheel Travel 9.1 in. (230 mm) Electrical System: Ignition Electronic Rectified A/C 600 Watt @ 5000 rpm Charging...
  • Page 18 OPERATOR SAFETY Operator Safety General Safety Precautions WARNING Failure to heed the warnings contained in this manual can result in serious injury or death. This vehicle is not a toy and can be hazardous to operate. This vehicle handles differently from other vehicles, such as cars. A collision or rollover can occur quickly, even during routine maneuvers like turning or driving over obstacles, if you fail to take proper precautions.
  • Page 19 OPERATOR SAFETY Equipment Modifications CFMOTO is concerned with the safety of our customers and for the general public. Therefore, we strongly recommend that consumers do not install on a vehicle, any equipment that may increase the speed or power of the vehicle, or make any other modifications to the vehicle for these purposes. Any modifications to the original equipment of the vehicle create a substantial safety hazard and increase the risk of body injury.
  • Page 20 OPERATOR SAFETY Avoid Gasoline Fires and Other Hazards Gasoline is extremely flammable and highly explosive. Fuel vapors can spread and be ignited by a spark or flame many feet away from the engine. To reduce the risk of fire or explosion, follow these instructions: Use only an approved gasoline container to store fuel.
  • Page 21 OPERATOR SAFETY WARNING Gasoline is highly flammable and explosive under certain conditions. Allow the engine and exhaust system to cool before filling the tank. Always exercise extreme caution whenever handling gasoline. Always refuel with the engine stopped, and outdoors or in a well ventilated area. Never carry a plastic container with gasoline in the cargo area while riding.

  • Page 22: Owner Responsibilities Owner Responsibilities

    OPERATOR SAFETY Owner Responsibilities Be Qualified and Responsible Read this Owner’s Manual and the warning decals on this vehicle carefully. Take a safety training course on open areas if available. Practice at low speeds. Higher speeds require greater experience, knowledge and suitable riding conditions.
  • Page 23 OPERATOR SAFETY Riding Carefully This vehicle is not a toy and can be hazardous to operate. This vehicle handles differently from other • vehicles such as motorcycles or cars. A collision or rollover can occur quickly, during abrupt maneuvers such as sharp turns, acceleration or deceleration, and driving on hills or over obstacles if you fail to take proper precautions.
  • Page 24 OPERATOR SAFETY Always follow all safe operating practices outlined in this manual to avoid vehicle rollover. • Do not put your hands and/or feet outside of the vehicle when driving. The ROPS will not protect you • from injury in all rollovers. Always have your authorized CFMOTO dealer thoroughly inspect the ROPS if it ever becomes •...
  • Page 25 OPERATOR SAFETY operating over obstacles or fallen trees. Never operate this vehicle in deep water or fast flowing water. Remember that wet brakes may have • reduced stopping ability. Test your brakes after leaving water. If necessary, apply them several times while driving slowly to let friction dry out the brakes.
  • Page 26 OPERATOR SAFETY Safe Riding Gear Always wear clothing suited to the type of riding. Operating this vehicle requires wearing special protective clothing for comfort and to reduce the chance of injury: 1. A helmet is the most important piece of protective gear for safe riding.

  • Page 27: Safety Labels, Locations And Warnings Safety Labels, Locations And Warnings

    OPERATOR SAFETY Safety Labels, Locations and Warnings Warning labels have been placed on the vehicle for your protection. Read and follow the instructions on each decal carefully. If a decal becomes illegible or comes off, contact your dealer to purchase a replacement. Read and follow the safety warnings in this manual.
  • Page 28 OPERATOR SAFETY...
  • Page 29 OPERATOR SAFETY...
  • Page 30 OPERATOR SAFETY...
  • Page 31 OPERATOR SAFETY...
  • Page 32 OPERATOR SAFETY UFORCE 1000XL Safety Labels...
  • Page 33 OPERATOR SAFETY 13 12...
  • Page 34 OPERATOR SAFETY...
  • Page 35 OPERATOR SAFETY...
  • Page 36 OPERATOR SAFETY...

  • Page 37: Potential Hazard Warnings Potential Hazard Warnings

    OPERATOR SAFETY Potential Hazard Warnings WARNING POTENTIAL HAZARD: Operating this vehicle without proper instruction. WHAT CAN HAPPEN: The risk of an accident is greatly increased if the operator does not know how to operate the vehicle properly in different situations and on different types of terrain. HOW TO AVOID THE HAZARD: Beginning and inexperienced operators should complete a safety training course if offered by dealer.
  • Page 38 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Carrying more passengers than the seat capacity. WHAT CAN HAPPEN: A passenger not seated in the vehicle could be ejected from the vehicle unexpectedly or make contact with moving components, both of which can result in severe injury or death. HOW TO AVOID THE HAZARD: Never allow carrying more passengers than the seat capacity.
  • Page 39 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Operating this vehicle without wearing approved helmet, eye protection, and protective clothing. WHAT CAN HAPPEN: Operating without an approved helmet increases the risk of a severe head injury or death in the event of an accident.
  • Page 40 OPERATOR SAFETY HOW TO AVOID THE HAZARD: Always wear an approved helmet that fits properly. Always wear eye protection (goggles or face shield), gloves, long-sleeved shirt or jacket, long pants, and over-the-calf boots. WARNING POTENTIAL HAZARD: Operating the vehicle after consuming alcohol or drugs. WHAT CAN HAPPEN: Consumption of alcohol and/or drugs could seriously affect operator judgment.
  • Page 41 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Operating at excessive speeds. WHAT CAN HAPPEN: Excessive speed increases the operator’s chance of losing control, which can result in an accident. HOW TO AVOID THE HAZARD: Always operate at a speed that’s proper for the terrain, visibility and operating conditions, and your experience.
  • Page 42 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Failure to inspect the vehicle before operating. Failure to properly maintain the vehicle. WHAT CAN HAPPEN: Poor maintenance increases the possibility of an accident or equipment damage. HOW TO AVOID THE HAZARD: Always inspect your vehicle before each use to make sure it’s in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in the owner’s manual.
  • Page 43 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Failure to use extra caution when operating on unfamiliar terrain. WHAT CAN HAPPEN: Unfamiliar terrain may contain hidden rocks, bumps, or holes that could cause loss of control or overturn. HOW TO AVOID THE HAZARD: Travel slowly and use extra caution when operating on unfamiliar terrain.
  • Page 44 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Failure to use extra caution when operating on excessively rough, slippery or loose terrain. WHAT CAN HAPPEN: Operating on excessively rough, slippery or loose terrain could cause loss of traction or loss of control, which could result in an accident or overturn.
  • Page 45 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Traveling down excessively steep hills. WHAT CAN HAPPEN: Improper downhill travel could cause loss of control or overturn. HOW TO AVOID THE HAZARD: Never operate on hills too steep for the vehicle or for your abilities. Practice on smaller hills before attempting large hills.
  • Page 46 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Traveling down excessively steep hills. WHAT CAN HAPPEN: Improper downhill travel could cause loss of control or overturn. HOW TO AVOID THE HAZARD: Never operate on hills too steep for the vehicle or for your abilities. Practice on smaller hills before attempting large hills.
  • Page 47 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Improperly crossing hills and turning on hills. WHAT CAN HAPPEN: Improperly crossing or turning on hills could cause loss of control or overturn. HOW TO AVOID THE HAZARD: Use extra caution when turning on any hill. Avoid crossing the side of a steep hill. WHEN CROSSING THE SIDE OF A HILL: Always follow proper procedures as described in the owner's manual.
  • Page 48 OPERATOR SAFETY IF THE VEHICLE BEGINS ROLLING: Never apply engine power. Carefully apply the foot brake while rolling backwards. When fully stopped, keep the brake applied, shift the gear selector to the parking position, and determine the best way to safely change direction.
  • Page 49 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Skidding or sliding. WHAT CAN HAPPEN: Skidding or sliding can cause loss of control. If the tires regain traction unexpectedly, the vehicle could overturn. HOW TO AVOID THE HAZARD: On slippery surfaces such as ice, travel slowly and use extra caution to reduce the chance of skidding or sliding out of control.
  • Page 50 OPERATOR SAFETY HOW TO AVOID THE HAZARD: Never exceed the stated load capacity for this vehicle. Cargo should be properly distributed and securely attached. Reduce speed and always use low gear when carrying cargo or pulling a trailer. Allow a greater distance for braking. Always follow the instructions in the owner's manual for carrying cargo or pulling a trailer.
  • Page 51 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Improperly operating in reverse. WHAT CAN HAPPEN: The vehicle could collide with an obstacle or person, resulting in severe injury. HOW TO AVOID THE HAZARD: Before shifting into reverse gear, always check for obstacles or people behind the vehicle. When it's safe to proceed, back slowly.
  • Page 52 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Operating the vehicle with improper modifications. WHAT CAN HAPPEN: Improper installation of accessories or modification of the vehicle may cause changes in handling which could lead to an accident. HOW TO AVOID THE HAZARD: Never modify the vehicle through improper installation or use of accessories. All parts and accessories added to the vehicle must be genuine parts or equivalent components designed for use on this vehicle, and they should be installed and used according to approved instructions.
  • Page 53 OPERATOR SAFETY WARNING Leaving the keys in the ignition can lead to unauthorized use of the vehicle, resulting in serious injury or death. Always remove the ignition key when the vehicle is not in use. WARNING After any overturn or accident, have an authorized dealer inspect the entire vehicle for possible damage, including (but not limited to) brakes, throttle and steering systems.

  • Page 54: Controls And Features Controls And Features

    Controls and Features Primary Controls Steering Wheel - 1 The steering wheel is located in front of the driver’s seat. Tilt Lever - 2 A tilt lever feature allows the steering wheel to be adjusted to fit the operator. Pull down on the lever and adjust the steering wheel tilt angle for comfort.
  • Page 55 CONTROLS AND FEATURES Electronic Throttle Pedal - (  3   ) The Electronic throttle pedal is located to the right of the brake pedal. The throttle pedal controls engine rpm and vehicle speed. To control vehicle speed, press on the throttle pedal with your right foot.
  • Page 56 Brake Pedal - 4 The brake pedal is located to the left of the throttle pedal. Release the throttle pedal and press the brake pedal with your foot to slow or stop the vehicle. Shift Lever - 5 The shift lever is located to the right of the driver’s seat. The shift lever is used to change the transmission gear selection: Press the brake pedal before gear shifting, to ensure personnel safety.
  • Page 57 CONTROLS AND FEATURES NOTE: In reverse operation, the engine’s RPM is limited, thus limiting the vehicle reverse speed under 15.5 mph (25 km/h). WARNING Use extreme caution driving downhill in reverse. Gravity can increase the vehicle speed above the set limited reverse speed. WARNING Always shift to PARK (P) position when the vehicle is not in operation.

  • Page 58: Secondary Controls Secondary Controls

    Secondary Controls Speed Limit Override Switch - 6 The engine is normally speed limited when operating in 4WD- LOCK. If conditions require more engine power: Release the throttle and press the button to override the • speed limiting function. The override indicator light will come Reapply the throttle while this button is pressed.
  • Page 59 CONTROLS AND FEATURES Main Light Switch - 8 The main light switch consists of 3 positions. Turn the switch to select the following functions: When the switch is at this position, head light, position light, tail light and instrument light are on . When the switch is at this position,daytime running light, tail light, and front position light are on.
  • Page 60 Horn Switch - 9 Press this button, the horn will sound. Stop Switch - 10 When press the stop switch, the ECU, fuel injector, ignition coil, fuel pump and start system stop working. 2WD / 4WD Switch - 11 This vehicle is equipped with an on-command “2WD”/”4WD” and front diff-lock “LOCK”/”4WD”...
  • Page 61 CONTROLS AND FEATURES On-Command 2WD / 4WD / 4WD-LOCK Switch Operation To change from 2WD to 4WD: Stop the vehicle. Turn the switch from left to middle. The 4WD indicator “ ” on dashboard light up. To change from 4WD to 2WD: Stop the vehicle. Turn the switch from middle to left. The 2WD indicator “...
  • Page 62 Mode Switch - 12 When the switch is on this position, the vehicle is in ‘NORMAL’ mode. The dashboard display will also shift to ‘NORMAL’ mode. The vehicle will have a less aggressive throttle response for smooth starts and is intended for flat trails, hard NORMAL pack ground, etc.

  • Page 63: Vehicle Features Vehicle Features

    CONTROLS AND FEATURES Vehicle Features Feature Locations - 1...
  • Page 64 Feature Locations – 2...
  • Page 65 CONTROLS AND FEATURES Feature Locations - 3...
  • Page 66 Feature Locations - 4...
  • Page 67 CONTROLS AND FEATURES Feature Locations - 5...
  • Page 68 Feature Descriptions Anchoring Hooks - 1 12 anchoring hook points are located inside the cargo area to secure cargo inside the cargo box. Driver Seat - 2 The driver’s seat offers fore and aft adjustment. To adjust the seat, turn the lever to unlock it. Release the lever to lock the seat into desired position.
  • Page 69 CONTROLS AND FEATURES Passenger’s seat storage - 7 A storage box with basic tools is provided. It is typically stored under the passenger seat. Passenger Seat - 8 The bench seat is not adjustable. Seat back and seat bottom can be removed when necessary for maintenance or access to storage.
  • Page 70 CONTROLS AND FEATURES Shoulder Guards - 11 The vehicle is equipped with shoulder guards to help restrain the body of the driver and passenger inside vehicle. Cargo Box and Tilt Feature - 12 Refer to the safety decals on the cargo box for load information. The cargo box has a release handle on each side that can be used to tilt the box for maintenance or to dump material.
  • Page 71 CONTROLS AND FEATURES Safety Nets - 16 Side nets are provided on each side of the cab to help to protect the driver and passenger in the cab. Always attach the side nets when driving the vehicle. Make sure the four mounting points of side nets are fixed on the vehicle, and buckle the net into the lock connector.
  • Page 72 Extra Vehicle Features 12 Volt Accessory Power Auxiliary 12Vdc power and USB outlets are provided on the right side of the dashboard for operating accessories such as hand-held spot lights and charging electronic devices. Please consult with your dealer on the use of powered accessories with your vehicle. 1 12 Volt Accessory Power 2 USB...
  • Page 73 CONTROLS AND FEATURES Wireless Winch Remote Control (1) This vehicle is equipped with a wireless remote control for operation of the winch system. The wireless remote control is typically stored in the glove box on the passenger side of the dashboard. To enable the wireless remote control: Press both control buttons at the same time.
  • Page 74 Brake Fluid Reservoir and Level Indicator Brake master cylinder reservoir level can be viewed under the front access cover. Check the brake master cylinder fluid level before each use of the vehicle. If the fluid level is lower than the “low” mark, determine the cause or refill with brake fluid as necessary.

  • Page 75: Cvt System Cvt System

    CONTROLS AND FEATURES CVT System This vehicle has a Continuously Variable Transmission (CVT) system that utilizes a drive belt and clutch pulleys to automatically vary transmission drive ratios, allowing infinite variability between the highest and lowest vehicle speeds with no discrete steps or shifts.

  • Page 76: Engine Braking System (Ebs) Engine Braking System (Ebs)

    Engine Braking System (EBS) (Australia Market Only) This vehicle is equipped with an engine braking system. The CVT primary clutch mounted to the engine crankshaft contains a one-way bearing that creates engine braking, which occurs when the throttle is completely closed, the engine is below the primary clutch engagement RPM, and the vehicle is at speed. It uses the engine’s compression/resistive force to slow the over-driving transmission speed via the CVT drive belt, thereby slowing the entire vehicle gradually.
  • Page 77 CONTROLS AND FEATURES How To Avoid CVT Drive Belt and Component Failure CVT clutch and belt life can be dramatically extended by avoiding these common operating mistakes: Causes CVT damage: Solution: Attempting to load the vehicle onto a truck bed or tall Shift transmission to low gear during loading of the vehicle to prevent belt burning.
  • Page 78 Causes CVT damage: Solution Shift the transmission to low gear, and carefully use Stuck in mud or snow. fast, aggressive throttle application to engage CVT. WARNING: Excessive throttle may cause loss of control and vehicle overturn. Climbing over large objects from a stopped position. Shift the transmission to low gear, and carefully use fast, brief, aggressive throttle application to engage the CVT.

  • Page 79: Dashboard Indicators And Warnings Dashboard Indicators And Warnings

    CONTROLS AND FEATURES Dashboard Indicators and Warnings Bluetooth Override EFI Fault 13 Adjusting Button 7 Call indicator indicator indicator Indicator Brake Fault Neutral Pilot 2 Engine RPM 8 Turning light 14 Clock Warning Lamp Indicator Seat belt Parking Brake 3 Drive Method 15 Fuel Gauge Indicator warning light...
  • Page 80 TFT Dashboard WORK mode...
  • Page 81 CONTROLS AND FEATURES TFT Dashboard Normal mode...

  • Page 82: Dashboard Indicators And Warnings Dashboard Indicators And Warnings

    Dashboard Indicators and Warnings Bluetooth Indicator - 1 This vehicle is equipped with bluetooth function for connecting and disconnecting calls from a mobile phone. The bluetooth icon will not light when it is not paired and connected to a phone. It will flash during pairing and connecting, and remains on after pairing successfully and staying connected.
  • Page 83 CONTROLS AND FEATURES Coolant Temperature - 6 This dashboard section displays the current coolant temperature, ‘C’ is low temperature, ‘H’ is high temperature. Both over-low and over-high are abnormal. Idle the vehicle to warm the engine when it’s too cold, and park the vehicle when it’s too hot to prevent the coolant from boiling. Keep the coolant temperature in a normal range.
  • Page 84 Clock - 14 This dashboard section can be adjusted to the correct time using the ‘SEL’ and ‘ADJ’ buttons. Refer to the ‘Navigation / Settings / Adjustments’ section of the owner’s manual for instructions. Fuel Gauge - 15 Indicates the fuel level in the fuel tank. “F” indicates the fuel level is about 40 L. When fuel gauge is in red zone, the residual fuel in the fuel tank is about 3 L.
  • Page 85 CONTROLS AND FEATURES Seat belt warning light - 21 Seatbelt Reminder. This indicator displays when the seat belt is not fastened. When latch plate is not pushed into the buckle, indicator on the dashboard will be on and vehicle speed will be restricted to 25km/h; When the latch plate is pushed into the buckle, indicator on the dashboard will be off and vehicle speed limiting feature is disabled.
  • Page 86 TFT Dashboard Settings/Adjustments State Display Operation Result Shift to trip Engine RPM Short press TRIP Shift to engine hour Short press Engine hour TRIP Long press Trip resets to be zero Display TRIP shifting Shift to dashboard brightness Dashboard brightness Engine Hours Short press Dashboard Shift to engine RPM...

  • Page 87: Operating Your Vehicle Operating Your Vehicle

    OPERATING YOUR VEHICLE Operating Your Vehicle Break-In Period The break-in period for a new engine is very important. Careful treatment of a new engine at the beginning of ownership will result in more efficient performance and longer life. Perform the following procedures carefully: 1.
  • Page 88 OPERATING YOUR VEHICLE CAUTION During the break-in period: Do not operate at sustained full throttle. Damage to engine parts or decrease engine life may result if • excessive wide open throttle is used during the first 20 hours of use. Do not run engine with throttle over 1/2 open during the first 10 hours (or 100 miles/160km) of use.

  • Page 89: Pre-Ride Inspection Pre-Ride Inspection

    OPERATING YOUR VEHICLE Pre-Ride Inspection Before each use of the vehicle, a best practice is to complete the pre-ride inspection checklist. WARNING If a proper inspection is not done before each use, severe damage to the vehicle, severe injury, or death could result.

  • Page 90: Starting The Engine Starting The Engine

    OPERATING YOUR VEHICLE Starting the Engine WARNING Never run an engine in an enclosed area. Engine exhaust contains poisonous carbon monoxide and can cause loss of consciousness, resulting in severe injury or death. Starting a cold engine 1. Verify the gear selector is shifted to the Parking or Neutral position. 2.

  • Page 91: Shifting The Transmission Shifting The Transmission

    OPERATING YOUR VEHICLE Shifting the Transmission CAUTION To avoid transmission damage, return the throttle to the closed position, stop the vehicle, and apply the foot brake before shifting. NOTE: Low gear is the preferred transmission gear selection for all forward motion other than prolonged high speed travel.
  • Page 92 OPERATING YOUR VEHICLE Shifting: Low Gear to High Gear 1. Verify the throttle is closed and the vehicle is stopped completely. 2. Apply the foot brake. 3. Shift to ‘H’ by moving the gear selector along the shift guide. Shifting: to Reverse Gear 1.
  • Page 93 OPERATING YOUR VEHICLE Shifting: to Park 1. Verify the throttle is closed and the vehicle is stopped completely. 2. Apply the foot brake and press the gear selector button. 3. Shift to ‘P’ by moving the gear selector along the shift guide. Shake the vehicle forward and backward to verify that parking is engaged.

  • Page 94: Safe Operation - Driving Safely Safe Operation - Driving Safely

    SAFE OPERATION - DRIVING SAFELY Safe Operation - Driving Safely Responsibilities of the Operator As the operator of this vehicle, your common sense, judgment, and abilities are the only factors that will prevent injury to yourself, to others around you, and/or damage to the vehicle or environment. Recreational, Group, and Distance Riding One of the benefits of this vehicle is that it can take you off-road away from most communities.
  • Page 95 SAFE OPERATION - DRIVING SAFELY A rollover or other accident can occur quickly during abrupt maneuvers such as: • Sharp turns or hard acceleration. • Deceleration when turning. When driving on hills or over obstacles. • Abrupt maneuvers or aggressive driving can cause rollovers or loss of control even in flat open areas. If the vehicle rolls over, any part of your body (such as arms, legs, or head) outside of the cockpit can be crushed and trapped by the cage or other parts of the vehicle.
  • Page 96 SAFE OPERATION - DRIVING SAFELY This vehicle can roll over sideways, or tip over forward or backwards on slopes or uneven terrain: Avoid side hilling (driving along the slope rather than up or down a hill). When possible, drive straight •...
  • Page 97 SAFE OPERATION - DRIVING SAFELY Avoiding Collisions At higher speeds, there is an increased risk of losing control, particularly in challenging off-road conditions, and the risk of injury in a collision is greater. Never operate at excessive speeds. Always go at a speed that is proper for the terrain, visibility, and operating conditions, and your experience.

  • Page 98: Practice Exercises Practice Exercises

    SAFE OPERATION - DRIVING SAFELY Practice Exercises Before you go out for a ride, it is very important to familiarize yourself with the handling of your vehicle by practicing in a controlled environment. Find a suitable area to practice and perform the following exercises. It should be at least 147x147 ft.
  • Page 99 SAFE OPERATION - DRIVING SAFELY Note how your vehicle reacts in these different exercises. CFMOTO recommends releasing the throttle before entering a turn to help initiate directional change. You will feel the lateral force increasing with the speed and with your steering input. The lateral force should be maintained as low as possible to make sure it does not cause the vehicle to roll over.
  • Page 100 SAFE OPERATION - DRIVING SAFELY Reverse Exercise Practice using the reverse: Place 1 cone marker on both sides of the vehicle beside each rear wheel. • Move the vehicle forward until you can see the cone markers behind you, then stop the vehicle. •...
  • Page 101 SAFE OPERATION - DRIVING SAFELY Operating Your Vehicle Off-Road Operation The very nature of off-road operation is dangerous. Any terrain which has not been specially prepared to carry vehicles presents an inherent danger where terrain substance, shape, and steepness are unpredictable.
  • Page 102 SAFE OPERATION - DRIVING SAFELY WARNING When driving downhill in reverse, gravity can increase the vehicle speed above the set limited reverse speed. Failure to use caution when operating in reverse can result in serious injury or death. NOTE: This vehicle is equipped with a reverse speed limiter function. In reverse operation, the engine RPM is limited, thus limiting the vehicle reverse speed.
  • Page 103 SAFE OPERATION - DRIVING SAFELY Beware of slippery surfaces such as rocks, grass, logs, etc., both in the water and on its banks. A loss of traction may occur. Do not attempt to enter the water at high speed. Water will affect the braking ability of your vehicle.
  • Page 104 SAFE OPERATION - DRIVING SAFELY When riding on sand dunes, it is advisable to equip the vehicle with an antenna-type safety flag. This will help make your location more visible to others over the next sand dune. Proceed carefully should you see another safety flag ahead.
  • Page 105 SAFE OPERATION - DRIVING SAFELY Uphill Driving Use the low gear (L) for uphill driving. Due to its configuration, this vehicle has very good traction even while climbing, so much so that tip-over is possible before traction is lost. For example, it is common to encounter terrain situations where the top of the hill has eroded to a point that the hill peak rises very sharply.
  • Page 106 SAFE OPERATION - DRIVING SAFELY Hauling and Towing Loads Your vehicle can help you perform a number of different light tasks ranging from snow removal, to pulling wood, or carrying cargo. This can change the vehicle handling. To prevent possible injury, follow the instructions and warnings in this manual and on the vehicle.
  • Page 107 SAFE OPERATION - DRIVING SAFELY Vehicle Settings When Carrying Loads If the total load approaches to the total rated vehicle load, including weight of operator, passenger, cargo, accessories and trailer tongue weight: Inflate the tires to maximum pressure: • UFORCE 1000: Front tire: 70 kPa , rear tire: 100 kPa. UFORCE 1000 XL: Front tire: 80 kPa , rear tire: 100 kPa.
  • Page 108 SAFE OPERATION - DRIVING SAFELY WARNING Slack can cause a chain or cable to break and snap back, possibly causing injury. When pulling a load, respect the maximum hauling capacity. • If pulling another vehicle, be sure that someone is controlling the pulled vehicle. They must brake and •...
  • Page 109 SAFE OPERATION - DRIVING SAFELY Always use low gear while towing to avoid clutch wear and belt issues. • • Reduce speed when hauling or towing loads. Never exceed the stated load capacity for this vehicle. • All loads must be secured before operation. Unsecured loads may shift and create unstable operating •...
  • Page 110 SAFE OPERATION - DRIVING SAFELY While towing, the vehicle should never exceed 10 mph (16 km/h) towing a load on a level surface. • Vehicle speed should never exceed 5 mph (8 km/h) when towing loads in rough terrain, while cornering, or while ascending or descending a hill.

  • Page 111: Winch Operation Winch Operation

    SAFE OPERATION - DRIVING SAFELY Winch Operation (Select Markets) Your vehicle may be equipped with a winch that can pull certain capacities and types of loads. It is useful for vehicle self-recovery when stuck, assisting another vehicle in recovery, moving fallen trees, removing brush, etc.
  • Page 112 SAFE OPERATION - DRIVING SAFELY Never winch up or down, or to the sides at sharp angles. This can destabilize the winching vehicle and • possibly cause it to move without warning. Never attempt to winch loads that weigh more than the winch capacity rating. •...
  • Page 113 SAFE OPERATION - DRIVING SAFELY If winching at an angle is unavoidable, follow these precautions while operating: • Look at the winch drum occasionally. Never let the winch cable “stack” or accumulate at one end of the drum. Too much cable at one end of the drum can damage the winch and cable. If cable stacking occurs, stop winching.
  • Page 114 SAFE OPERATION - DRIVING SAFELY BEFORE YOU BEGIN - Realize that each winching situation is unique: Take your time to think through the winch operation you are about to perform. • Proceed slowly and deliberately. • Never hurry or rush during winching. •...
  • Page 115 SAFE OPERATION - DRIVING SAFELY WARNING: Never use a ‘recovery strap’ for winching. Recovery straps are designed to stretch and could release excessive energy that can result in SEVERE INJURY or DEATH if the strap or winch cable breaks. Use only undamaged tow straps or chains that do not stretch. 5.
  • Page 116 SAFE OPERATION - DRIVING SAFELY Vehicle Recovery Methods Vehicle Self-Recovery: A. Release the winch drum and pull out the required length of cable. • B. Whenever possible, pick an anchor point that aligns the winch cable to the vehicle’s centerline as •...
  • Page 117 SAFE OPERATION - DRIVING SAFELY Recovery of Another Vehicle: A. Release the winch drum and pull out the necessary length of cable. • B. Attach the winch hook to the vehicle. Whenever possible, pick an anchor point on the stuck vehicle •...
  • Page 118 SAFE OPERATION - DRIVING SAFELY A kinked winch cable made of wire rope that has been “straightened out”, even though it may look • usable, has been permanently and severely damaged. It can no longer achieve its load capacity rating. Promptly discontinue use of a winch cable in this condition.
  • Page 119 SAFE OPERATION - DRIVING SAFELY B. Pull out the winch cable that is wrapped unevenly onto the drum. • • C. Re-engage the winch drum. D. Have an assistant pull the winch cable hook strap tightly to apply about 100 lbs. (45 kg) of tension. •...
  • Page 120 SAFE OPERATION - DRIVING SAFELY Never use recovery straps with your winch. This is a form of shock loading. Recovery straps are • designed to stretch and can store energy. Stored energy in the recovery strap is released if a failure occurs, making the event even more hazardous.

  • Page 121: Maintenance Maintenance

    MAINTENANCE Maintenance Following the maintenance schedule in your owner’s manual will help keep your vehicle in the safest, most reliable condition. Inspection, adjustment, and lubrication of important components are explained in the maintenance schedules Inspect, clean, lubricate, adjust, and replace parts as necessary. When inspection reveals the need for replacement parts, always use genuine parts available from your dealer.

  • Page 122: Severe Use Definition Severe Use Definition

    MAINTENANCE Severe Use Definition CFMOTO defines severe vehicle use as: Frequent immersion in mud, water or sand • • Racing or race-style high RPM use Prolonged low speed, heavy load operation • • Extended engine idle • Short trip cold weather operation •...
  • Page 123 MAINTENANCE Periodic Maintenance Schedule and Icon Key Maintenance intervals in the following schedules are based upon average riding conditions and an average operating speed of approximately 12.4 mph (20 km/h). Vehicles subjected to severe or commercial use must be inspected and serviced more frequently. The following icon keys are used to note special circumstances: ►...

  • Page 124: General Recommended Lubrication General Recommended Lubrication

    MAINTENANCE General Recommended Lubrication Check all components at the intervals outlined in the Periodic Maintenance Schedule. Items not listed in the schedule should be lubricated at the general lubrication interval. Change lubricants more often under severe use, such as wet or dusty conditions. •...

  • Page 125: Pre-Ride Maintenance Checklist Pre-Ride Maintenance Checklist

    MAINTENANCE Pre-Ride Maintenance Checklist Perform these inspections before operating the vehicle: Maintenance before operation Item Hour Calendar Miles (km) Remarks ■ Steering system Pre-Ride ■ Throttle return Pre-Ride Front suspension and axles Pre-Ride Visually inspect, test, Rear suspension and axles Pre-Ride or check components.
  • Page 126 MAINTENANCE Maintenance before operation Item Hour Calendar Miles (km) Remarks Inspect. If deposits are visible, clean intake ► Air box sediment tube Pre-Ride tubes, air box, and replace air filter. Inspect. If deposits are visible, drain / clean ► CVT sediment tube Pre-Ride the CVT or have it serviced by a dealer.

  • Page 127: Break-In Maintenance Checklist Break-In Maintenance Checklist

    MAINTENANCE Break-In Maintenance Checklist Perform these maintenance items when the vehicle break-in is completed: Break-in Maintenance (Perform at the interval that arrives first) Item Hour Calendar Miles (km) Remarks Lubricate all grease points, General lubrication 200 (320) pivots, cables, etc. Change oil and filter.
  • Page 128 MAINTENANCE Break-in Maintenance (Perform at the interval that arrives first) Item Hour Calendar Miles (km) Remarks Inspect pad ► Brake pads 200 (320) thickness. Check terminals, clean, test battery Battery 200 (320) condition if required. Inspect for proper rpm. See dealer for ■...

  • Page 129: Periodic Maintenance Schedule Periodic Maintenance Schedule

    MAINTENANCE Periodic Maintenance Schedule Perform maintenance at the interval that arrives first after the break-in period: Periodic Maintenance Intervals (Perform at the interval that arrives first) Item Hour Calendar Miles (km) Remarks ► Brake pads Monthly 100 (160) Inspect pad thickness. Check terminals.
  • Page 130 MAINTENANCE Periodic Maintenance Intervals (Perform at the interval that arrives first) Item Hour Calendar Miles (km) Remarks Inspect level. Change yearly if hours or ► Front gear case oil 100h 1000 (1600) distance interval is not met. Inspect level. Change yearly if hours or ►...
  • Page 131 MAINTENANCE Periodic Maintenance Intervals (Perform at the interval that arrives first) Item Hour Calendar Miles (km) Remarks Inspect; clean external surfaces. ► Clean more frequently if subjected Radiator 500 (800) to severe use. ■ Inspect. Lubricate. Steering system 500 (800) ►...
  • Page 132 MAINTENANCE Periodic Maintenance Intervals (Perform at the interval that arrives first) Item Hour Calendar Miles (km) Remarks Inspect. Replace as ► ■ CVT drive belt necessary. See dealer for 100h 1000 (1600) service. Clean and Inspect pulleys. ■ CVT drive and driven pulleys 100h 1000 (1600) Replace worn parts.
  • Page 133 MAINTENANCE Periodic Maintenance Intervals (Perform at the interval that arrives first) Item Hour Calendar Miles (km) Remarks Inspect fuel tank, cap, ● fuel pump and fuel Fuel system 100h 500 (800) pump relay. Inspect; Replace if Spark plug 100h 2000 (3200) worn or fouled.
  • Page 134 MAINTENANCE Periodic Maintenance Intervals (Perform at the interval that arrives first) Item Hour Calendar Miles (km) Remarks Inspect for noise or ► ■ Wheel bearings 100h 1500 (2400) looseness. Replace as necessary. Visually inspect belts and test latches. Clean latch mechanism more ►...
  • Page 135 MAINTENANCE Periodic Maintenance Intervals (Perform at the interval that arrives first) Item Hour Calendar Miles (km) Remarks Inspect fluid for color ► Brake fluid change. Change fluid 200h 1000 (1600) every two years. Inspect for proper rpm. See dealer for Idle condition service if out of spec or erratic.

  • Page 136: Maintenance Procedures Maintenance Procedures

    MAINTENANCE Maintenance Procedures Air Filter Check and change the air filter at the intervals outlined in the Maintenance Schedule. The air filter element should be cleaned or replaced more often if the vehicle is used in extremely dusty or wet areas. Each time air filter maintenance is performed, check the air inlet of the air filter box for obstructions and debris.
  • Page 137 MAINTENANCE Air Filter Maintenance 1. Lift up the rear cargo box 2. Loosen the clasp and remove the air filter cover. 3. Remove paper filter element. 4. Inspect the paper air filter and verify it is okay to reinstall. Softly brush off accumulated dust if necessary.
  • Page 138 MAINTENANCE Drying the Air Filter Housing after Submersion If water has been ingested into the air filter housing, Drain the air filter housing, remove the air filter, and thoroughly dry the components. Do not use compressed air on the paper air filter. Contact your dealer if vehicle performance issues exist.
  • Page 139 MAINTENANCE Engine Oil Always check and change the engine oil at the intervals outlined in the Maintenance Schedule. Change oil more frequently under severe use conditions. To Check the Engine Oil Level With vehicle on a level surface, check the oil level as follows: 1.
  • Page 140 MAINTENANCE To Change the Engine Oil 1. Start the engine and allow it to warm up for (2~3) minutes, then stop the engine. 2. Place an oil pan under the engine to collect the used oil, and then remove the dipstick. 3.
  • Page 141 MAINTENANCE 1. Use a new drain bolt washer and tighten it to specified torque. NOTE Drain bolt tightening torque: 22 ft-lb. (30 N·m) 2. Add recommended oil to specified level and then screw in the oil dipstick. NOTE Oil capacity with oil filter replacement: 84.5 oz. (2.5 L) 3.
  • Page 142 MAINTENANCE Transmission Oil Oil Level Check 1. Place the vehicle on a level surface. 2. If the engine was running, wait a sufficient amount of time for the oil to settle and cool. 3. Remove the passenger seat and storage box (1), remove the plastic grommet pin (2), then remove the access panel (3) towards the driver direction.
  • Page 143 MAINTENANCE Oil Change 1. Place the vehicle on a level surface. 2. If the engine was running, wait a sufficient amount of time for the oil to settle and cool. 3. Place an oil pan under the engine to collect the used oil. 4.
  • Page 144 MAINTENANCE Engine Valve Clearance Adjustment The intake and exhaust valve clearances change with use of the vehicle, which can result in improper fuel/air supply or engine noise. To prevent this, the valve clearances must be adjusted according to the maintenance schedule.
  • Page 145 MAINTENANCE Front and Rear Gear Case The front and rear gear case must be checked for oil leaks before operating. If any leaks are found, have your dealer check and repair the vehicle. Front Gear Case Oil Check 1. Place the vehicle on a level surface. 2.
  • Page 146 MAINTENANCE Rear Gear Case Oil Check 1. Place the vehicle on a level surface. 2. Remove the oil filler bolt (1) and check the oil level. The level should be up to the brim of the hole. If the level is low, add sufficient oil to raise it to the specified level. 3.
  • Page 147 MAINTENANCE Front and Rear Axle Boots The front and rear axle boots (1) must be checked for holes or wear before operating. If any damage is found, have your dealer repair the vehicle. 1 Axle boots...
  • Page 148 MAINTENANCE What to do if water collects in the CVT housing If the vehicle was submerged in water deep enough that water has entered the CVT housing, remove the drain bolt (1) at the bottom of the housing to drain the water from the case. CAUTION If water drains from the CVT housing after removing the bolt, have your dealer inspect the vehicle, as water may have affected the CVT system and other engine parts.
  • Page 149 MAINTENANCE Cooling System Coolant Level Inspection 1. Place the vehicle on a level surface. 2. Inspect the coolant level in the reservoir. 3. If the coolant is at or below the lower limit mark; remove the access cover and the reservoir cap . Add coolant to the upper limit mark, install the reservoir cap, and then reinstall the access cover.
  • Page 150 MAINTENANCE Change the Coolant CAUTION After running the engine, never remove the radiator cap immediately. Wait for the engine to cool down before removing the radiator cap. Hot coolant can cause serious burns. 1. Place the vehicle on a level surface. 2.
  • Page 151 MAINTENANCE 12. Start the engine and let it idle for several minutes. Stop the engine and allow it to cool. Check the coolant level in the radiator. If it is low, add more coolant until it reaches the top of the radiator.
  • Page 152 MAINTENANCE Spark plug(s) The spark plug (1) is an important engine component that is easy to inspect. The color and condition of the spark plug can indicate the condition of the engine. The ideal color on the insulator around the center electrode is a medium-to-light tan color for an engine that is being operated normally.
  • Page 153 MAINTENANCE Spark Plug Removal and Inspection 1. Tilt the cargo box. 2. Clean any dirt or debris from the spark plug and cylinder area. 3. Remove the spark plug cap. 4. Use the spark plug socket and wrench from the tool kit to remove the spark plug.
  • Page 154 MAINTENANCE Spark plug removal to expel water from the engine If water has been ingested into the engine, it is important to remove the water as soon as possible by removing the spark plug(s) and using the starter system to rotate the engine for a short period to expel water out of the cylinder(s).
  • Page 155 MAINTENANCE Exhaust Spark Arrestor Clean carbon deposits from the spark arrester periodically while the muffler and exhaust are at normal air temperature. CAUTION Ensure that the exhaust pipe and muffler are fully cooled down before servicing the spark arrestor. 1. Remove the fasteners (1). 2.
  • Page 156 MAINTENANCE Battery Maintenance Guidelines: A special battery charger (constant low voltage/ampere) is required for recharging low-maintenance • batteries. Using a conventional battery charger may shorten the battery life. If the vehicle will not be used for a month or longer, remove the battery and store it in a cool, dry place. •...
  • Page 157 MAINTENANCE Brakes Brake Fluid Level Inspection Before riding, check that the brake fluid level is above the low mark and replenish whenever necessary. Brake fluid reservoir is located under the hood. Insufficient brake fluid may let air enter the brake system, possibly causing the brakes to become ineffective.
  • Page 158 MAINTENANCE brake pads or brake system leakage. Therefore, be sure to check the brake pads for wear before checking the brake system for leakage. Have your dealer check the cause if the brake fluid level • goes down unexpectedly. Brake Pad Inspection Inspect the front and rear brake pads and discs for damage and wear.
  • Page 159 MAINTENANCE Brake Fluid Change Complete brake system fluid replacement should be performed only by trained service personnel. Have your dealer replace the following components during periodic maintenance, or when they are damaged or leaking: Replace the brake hoses every four (4) years. •...
  • Page 160 MAINTENANCE Rear Hub Carrier Lubrication Lubricate the upper and lower pivots of the rear hub carrier: • Remove the rear wheels. Add grease into the hub carrier upper and lower pivot grease nipples (2) with a grease gun until • grease lightly flows from the bushing.
  • Page 161 MAINTENANCE Shock Preload Adjustment The front and rear shock spring preload and damping can be adjusted to for rider weight, cargo, and riding conditions. Always adjust the shock absorbers on the left and right side to the same setting, and reset them to the initial setting after carrying loads. Adjust the spring preload: A = Soft ~ B = Hard ●To increase the spring preload, loosen the lock nut and turn the...
  • Page 162 MAINTENANCE Wheels Tire Pressure Inspect the tire pressure before operation: CF1000UU/CF1000UZ Front: 10 PSI (70 kPa) Rear: 14 PSI (100 kPa) CF1000UU-2/CF1000UZ-2 Front: 14 PSI (100 kPa) Rear: 17 PSI (120 kPa) Tread Depth Inspect the tread depth regularly and replace the tires if the minimum tread depth is less than: Minimum tread depth: 3/32 in.
  • Page 163 MAINTENANCE Wheel Removal • Ensure vehicle is in park. Loosen the wheel fasteners. • Elevate the vehicle and place a suitable support stand under • the frame. Remove the fasteners from the wheel. • • Remove the wheel. Wheel Installation •...
  • Page 164 MAINTENANCE Electrical Fuses The fuse box is located under the front access cover. If a fuse is blown, turn off the main switch and install a new fuse of the specified amperage. Turn on the main switch. If the fuse immediately blows again, contact your dealer.
  • Page 165 MAINTENANCE Main Fuse and EPS Fuse A 40 Amp main fuse and a 40 Amp EPS fuse are located to the left of the battery If the fuse is blown, turn off the main switch and install a new fuse of the specified amperage. Turn on the main switch.
  • Page 166 MAINTENANCE Head Light Adjustment To adjust the head lights: Turn screws to adjust the high beam direction beam • vertically and horizontally. Turn screw to adjust the low beam vertically. • WARNING It is advisable to have your dealer perform headlight adjustments.
  • Page 167 MAINTENANCE Tail/Brake, Position, and Turn Signal Lamp Replacement Brake/tail lights, front position lights, and turn signals (if equipped) are LED type. Have your dealer replace the entire assembly if an LED is damaged or has failed. Fuel Evaporation System (EVAP) Your vehicle contains a fuel evaporation system (EVAP) that prevents fuel vapors from entering the atmosphere from the fuel tank and fuel system.

  • Page 168: Cleaning And Storage Cleaning And Storage

    CLEANING AND STORAGE Cleaning and Storage Washing the Vehicle Keeping your vehicle clean will not only improve its appearance, but it can also extend the life of various components. With a few precautions, your vehicle can be cleaned much like an automobile: The best and safest way to clean your vehicle is with a garden hose and a pail of mild soap and water.
  • Page 169 CLEANING AND STORAGE CAUTION Certain products, including insect repellants and other chemicals, will damage plastic surfaces. Use caution when using these products near plastic surfaces. Perform Repairs Make necessary repairs to your vehicle before storing to prevent further damage the next time you operate it. Check the Tires Inspect the tire treads and overall condition.
  • Page 170 CLEANING AND STORAGE Stabilize the Fuel Fill the fuel tank with fresh fuel that has been treated with fuel stabilizer according to the product label directions. Do not allow untreated fuel to remain in the tank longer than 30 days, as the fuel begins to degrade and can cause damage to the fuel system components.
  • Page 171 CLEANING AND STORAGE Reinstall the spark plug(s), cap(s), and side panel. • NOTE: Starting the engine during the storage period will disturb the protective film created by fogging. Corrosion could occur. Never start the engine during the storage period. Storage Area And Covering Support the vehicle with stands under the frame with the tires 30mm~40mm (1/2in) off the ground.

  • Page 172: Transporting The Vehicle Transporting The Vehicle

    CLEANING AND STORAGE Transporting the Vehicle Follow these procedures when transporting the vehicle: Turn off the engine and remove the key to prevent loss during transporting. • Ensure the fuel cap is installed correctly and secure. • • Ensure the seat is installed correctly and secure. Place the gear into any position except the parking position, and block the front and rear wheels to •...

  • Page 173: Vehicle Issue Diagnosis Vehicle Issue Diagnosis

    VEHICLE ISSUE DIAGNOSIS Vehicle Issue Diagnosis This section is intended to guide an average owner to simple items that could cause operating problems. Diagnosis of vehicle issues may require the experience of a dealership technician. Please contact your dealer if a solution is not apparent. Engine doesn’t turn over Possible Cause Solution...

  • Page 174: Engine Stops Or Loses Power Engine Stops Or Loses Power

    VEHICLE ISSUE DIAGNOSIS Engine stops or loses power Possible Cause Solution Clean radiator screen and external core; clean engine Overheated engine exterior; See your dealer Out of fuel Refuel with minimum 89 octane unleaded fuel Kinked or plugged fuel tank vent line Inspect and replace;...
  • Page 175 VEHICLE ISSUE DIAGNOSIS Loose ignition connections Check all connections and tighten Low battery voltage Recharge battery to 12.8 Vdc; check charging system – Confirm battery health Clogged air filter Inspect and replace as necessary Reverse speed limiter malfunction See your dealer Electronic throttle control malfunction See your dealer Other mechanical failure...
  • Page 176 VEHICLE ISSUE DIAGNOSIS Engine turns over, Fails to start Possible Cause Solution Engine turns over, Fails to start Refuel Clogged fuel filter Inspect and replace as necessary Water is present in fuel Replace with 89 minimum octane unleaded fuel Inspect pump and fuse; Replace as necessary Fuel pump is inoperative Old or non-recommended fuel Replace with 89 minimum octane unleaded fuel...

  • Page 177: Engine Backfires Engine Backfires

    VEHICLE ISSUE DIAGNOSIS Engine backfires Possible Cause Solution Weak spark from spark plugs Inspect and replace spark plugs as necessary Incorrect spark plug gap or heat range Set gap to specs or replace plugs Old or non-recommended fuel Replace with minimum 89 octane unleaded fuel Incorrectly installed spark plug wires See your dealer Incorrect ignition timing...
  • Page 178 VEHICLE ISSUE DIAGNOSIS Possible Cause Solution Other mechanical failure See your dealer Possible Lean or Rich fuel mixture See your dealer Low or contaminated fuel Add or change fuel, clean the fuel system Low octane fuel Replace with minimum 89 octane unleaded fuel Clogged fuel filter Replace filter Replace with minimum 89 octane unleaded fuel...
  • Page 179 VEHICLE ISSUE DIAGNOSIS EFI Malfunction Indicator Light The Electronic Fuel Injection system on your vehicle contains a self-diagnostic feature that will illuminate the malfunction indicator light (MIL) if it detects a problem. When this indicator flashes, please contact your In normal operation, the EFI indicator will be off. dealer Each trouble code consists of 4 digits, denoted by the short flash of the EFI MIL indicator with a 1 second interval between digits.
  • Page 180 VEHICLE ISSUE DIAGNOSIS EFI Malfunction Indicator Example - CODE ‘0650’: ‘0’ - light flashes 10 times ‘6’ - light flashes 6 times ‘5’ - light flashes 5 times ‘0’ - light flashes 10 times Flash interval: 1 sec. The flash cycle will repeat after EFI MIL indicator light turns off for 3 seconds. If there are multiple codes detected, the system will wait approximately 3 seconds and display the next code.

  • Page 181: Eps Malfunction Indicator Light Eps Malfunction Indicator Light

    VEHICLE ISSUE DIAGNOSIS EPS Malfunction Indicator Light The Electronic Power Steering system on your vehicle contains a self-diagnostic feature that will illuminate the malfunction indicator light (MIL) if it detects a problem,when this indicator flashes, please contact your In normal operation, the EPS indicator will be on after the ignition switch is turned to ON, but EPS will dealer not work.
  • Page 182 VEHICLE ISSUE DIAGNOSIS EPS Malfunction Indicator Times of long flash represent the tens digit; Times of short flash represent the single digit; Duration of long flash: 2 sec. Duration of short flash: 1 sec. Flash interval: 1 sec. The flash cycle will repeat after EPS MIL indicator light turns off for 3 seconds Stop operating the vehicle and contact your dealer immediately if the EPS system MIL is flashing or there is a loss of steering assist with the engine running.

  • Page 183: Electronic Power Steering (Eps) Fault Diagnosis And Solution Electronic Power Steering (Eps) Fault Diagnosis And Solution

    VEHICLE ISSUE DIAGNOSIS Electronic Power Steering (EPS) Fault Diagnosis and Solution 1. Wire connectors have bad contact or are S t e e r i n g w i t h o u t 1. C h e c k w h e t h e r w i r e assistance disconnected connectors and pins are...

  • Page 184: Cfmoto Limited Warranty Cfmoto Limited Warranty

    CFMOTO LIMITED WARRANTY FOR USA CFMOTO Limited Warranty Dear Customer, Thank you for purchasing a CFMOTO product, if any component on your vehicle is found to be defective in materials or workmanship within the terms and conditions of this Limited Warranty, the defective component will be repaired or replaced (at the option of CFMOTO) without charge for parts and/or labor at any authorized dealer located within the United States.
  • Page 185 CFMOTO LIMITED WARRANTY FOR USA A. A 30-DAY WARRANTY coverage period applies to all new CFMOTO vehicles in relation to the vehicle’s: • Battery • Spark Plugs • Air Filters • Oil and Fuel Filters B. A 90-DAY WARRANTY coverage period applies to all new CFMOTO vehicles in relation to the vehicle’s: •...
  • Page 186 CFMOTO LIMITED WARRANTY FOR USA 3. EXCLUSIONS FROM WARRANTY COVERAGE: Any Damage resulting from the following acts or circumstances is not covered by the CFMOTO POWERSPORTS, Inc., Limited Warranty: • Fire • Collision Theft • Unavoidable natural disasters • • Improper storage or transportation Failure or negligence in the performance of periodic vehicle maintenance •...
  • Page 187 CFMOTO LIMITED WARRANTY FOR USA 5. TRANSFER OR CONTINUATION OF WARRANTY: This warranty is transferable only under the following conditions: Transfer information must be provided to an authorized CFMOTO POWERSPORTS, Inc. dealer, who • will then forward the information to CFMOTO POWERSPORTS, Inc.; The complete model and serial number as shown on the original warranty document must be provided.
  • Page 188 CFMOTO LIMITED WARRANTY FOR USA 8. CUSTOMER ASSISTANCE: Any questions or concerns regarding your CFMOTO vehicle or related products should be directed to an authorized CFMOTO dealer. However, if a dealer is unable to address customer concerns or a product issue, CFMOTO POWERSPORTS Customer Service can be contacted directly at (763) 398-2690 or by e-mail: info@cfmoto-us.com.
  • Page 189 CFMOTO LIMITED WARRANTY FOR USA 12. INTEGRATION: This limited warranty supersedes any and all oral, express, or written warranties, statements, or undertakings that may previously have been made, and contains the entire agreement of the parties with respect to the warranty of CFMOTO vehicles. Any and all warranties not contained in this Agreement are specifically excluded.
  • Page 190 CFMOTO LIMITED WARRANTY FOR USA CALIFORNIA EVAPORATIVE EMISSIONS CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS INTRODUCTION: The California Air Resources Board (CARB) and CFMOTO Powersports, Inc. (CFMOTO) are pleased to explain the evaporative emissions control system warranty on your 2020 and later-model year off-highway recreation vehicles (OHRVs).
  • Page 191 CFMOTO LIMITED WARRANTY FOR USA exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. As an OHRV owner, you should also be aware that CFMOTO may deny you warranty coverage if your OHRV or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

  • Page 192: U.s.a. Epa And Carb Emissions Control Limited Warranty

    CFMOTO LIMITED WARRANTY FOR USA U.S.A. EPA and CARB Emissions Control Limited Warranty This emissions limited warranty is in addition to the CFMOTO Powersports, Inc. standard limited warranty for your vehicle. CFMOTO Powersports, Inc. warrants that at the time it is first purchased, this emissions- certified vehicle is designed, built and equipped so it conforms to applicable U.S.
  • Page 193 CFMOTO LIMITED WARRANTY FOR USA The following parts are considered emission-related components for evaporative emissions: ● Fuel Tank ● Vacuum Control Diaphragms* ● Fuel Cap ● Control Cables* ● Fuel Line ● Control Linkages* ● Fuel Line Fittings ● Purge Valves ●...
  • Page 194 CFMOTO LIMITED WARRANTY FOR USA ALL IMPLIED WARRANTIES (INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO THE WARRANTY PERIOD DESCRIBED HEREIN. CFMOTO POWERSPORTS, INC. DISCLAIMS ALL EXPRESS WARRANTIES NOT STATED IN THIS WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply if it is inconsistent with the controlling state law.

  • Page 195: Noise Control System And Tampering Noise Control System And Tampering

    CFMOTO LIMITED WARRANTY FOR USA Noise Control System and Tampering Warranty time period: 1,865 miles (3000 km) Federal law prohibits the following acts or causing thereof: 1. The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use or;...

  • Page 196: Change Of Ownership Change Of Ownership

    Change of Ownership If you sell your vehicle, any valid remainder of the warranty can be transferred to the new owner. Please record the details of the exchange below and inform an authorized CFMOTO dealer: Change of Original Purchaser 2nd Owner 3rd Owner 4th Owner Ownership...
  • Page 197 5SYV-380101-6000-13 US21A ZHEJIANG CFMOTO POWER CO., LTD. MANUFACTURED BY: Add:NO.116,Wuzhou Road, Yuhang Economic Development Zone,Hangzhou 311100,Zhejiang Province,China Tel:86-571-86258863 Fax:+86-571-89265788 E-mail:service@cfmoto.com.cn http://global.cfmoto.com DISTRIBUTED BY: DISTRIBUTED BY CFMOTO POWERSPORTS INC. CANADA MOTOR IMPORT INC. 3555 Holly Lane N. Suite #30, Plymouth MN, 55447, USA 24 rue Industrielle, Saint-Benoît Labre, Toll free: (888) 8-CFMOTO (823-6686) Québec, Canada, G0M 1P0...

This manual is also suitable for:

Uforce 1000Cf1000uuCf1000uzCf1000uu-2Cf1000uz-2

Table of Contents

Save PDF