CF MOTO CF600UU Owner's Manual
  1. Manuals
  2. Brands
  3. CF MOTO Manuals
  4. Offroad Vehicle
  5. CF600UU
  6. Owner's manual
CF MOTO CF600UU Owner's Manual

CF MOTO CF600UU Owner's Manual

Hide thumbs Also See for CF600UU:
Table of Contents

Advertisement

Quick Links

Download this manual
UFORCE
600
CF600UU
C F600UZ
READ THIS MANUAL CAREFULLY
It contains important safety information
This ROV should not be ridden by anyone under 16
years of age. Passenger under 12 are prohibited.
OWNER'S
MANUAL

Advertisement

Table of Contents
loading

Related Manuals for CF MOTO CF600UU

Summary of Contents for CF MOTO CF600UU

  • Page 1 UFORCE CF600UU OWNER’S C F600UZ MANUAL READ THIS MANUAL CAREFULLY It contains important safety information This ROV should not be ridden by anyone under 16 years of age. Passenger under 12 are prohibited.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Foreword ...................... 5 Welcome ........................5 EVAP System ( Evaporative Emission Control System ) ..........6 Catalytic Converter ......................6 Signal Words .........................7 Introduction ....................10 Vehicle Identification Numbers and Key Information ........... 11 Specifications ......................12 Operator Safety ..................18 General Safety Precautions ..................18 Owner Responsibilities ....................22 Safety Labels, Locations and Warnings ..............27...
  • Page 3 How to Avoid CVT Drive Belt and Clutch Failures ............73 Dashboard Indicators and Warnings ................76 Operating Your Vehicle ................84 Break-In Period ......................84 Pre-Ride Inspection .....................86 Throttle ........................86 Foot Brake ........................87 Starting the Engine ......................87 Shifting the Transmission ....................88 Safe Operation - Driving Safely ..............92 Responsibilities of the Operator ..................92 Practice Exercises .......................95 Operating Your Vehicle ....................98...
  • Page 4 Maintenance Procedures ..................131 Cleaning and Storage ................167 Transporting the Vehicle ...................171 Vehicle Issue Diagnosis ................172 Engine Does not Turn Over ..................172 Engine Pings or Knocks ...................172 Engine Stops or Loses Power ..................173 Engine Turns Over, Fails to Start ................174 Engine Backfires ......................175 Engine turns over, Fails to start .................175 EFI Malfunction Indicator Light .................177...

  • Page 5: Foreword

    FOREWORD Foreword Welcome Thank you for purchasing a CFMOTO vehicle, and welcome to our world-wide family of CFMOTO enthusiasts. Be sure to visit us online at www.cfmoto.com for the latest news, new product introductions, upcoming events, and more. CFMOTO is an international company that specializes in the development, manufacture, and marketing of all-terrain vehicles, utility vehicles, large displacement motorcycles, and their core components.

  • Page 6: Evap System ( Evaporative Emission Control System )

    FOREWORD WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. EVAP System ( E vaporative Emission Control System     (If equipped) When required by environmental emissions regulations, this vehicle is manufactured with a fuel evaporation system (EVAP) to prevent fuel vapors entering the atmosphere from the fuel tank and fuel system.

  • Page 7: Signal Words

    FOREWORD Signal Words A signal word calls attention to a safety message or messages, a property damage message or messages, and designates a degree or level of hazard seriousness. The standard signal words in this manual are WARNING, CAUTION and NOTE or NOTICE. The following signal words and symbols appear throughout this manual and on your vehicle.
  • Page 8 FOREWORD NEVER: • Operate without proper training or instruction. • Operate on public roads. A collision can occur with another vehicle. • Operate on paved roads. Pavement may seriously affect handling and control. • Operate at speeds too fast for your skill, conditions, or the terrain. •...
  • Page 9 FOREWORD READ THE OWNER’S MANUAL FOLLOW ALL INSTRUCTIONS AND WARNINGS WARNING Read, understand, and follow all of the instructions and safety precautions in this manual and on all product labels. Failure to follow the safety precautions could result in serious injury or death. WARNING The engine exhaust gas from this product contains CO, which is deadly gas and could cause headaches, giddiness, loss of consciousness, even death.

  • Page 10: Introduction

    INTRODUCTION Introduction Thank you for purchasing a CFMOTO vehicle, and welcome to our world-wide family of CFMOTO enthusiasts. For safe and enjoyable operation of your vehicle, be sure to follow the instructions and recommendations in this owner’s manual. Information about major repairs are outlined in the CFMOTO Service Manual, and should only be performed by a CFMOTO service dealer and technician.

  • Page 11: Vehicle Identification Numbers And Key Information

    INTRODUCTION Vehicle Identification Numbers and Key Information Record your vehicle’s identification numbers in the spaces provided. Remove the spare key and store in a safe place. Your key can be duplicated only by mating a key blank with one of your existing keys. If both keys are lost, the complete lock assembly must be replaced.

  • Page 12: Specifications

    SPECIFICATION Specifications UFORCE 600 Item CF600UU CF600UZ (EVAP) (Non-EVAP) Overall Length 111 in. (  2 820 mm  ) Overall Width 57.9 in. (  1 470 mm  ) Overall Height 76.8 in. (  1 950 mm  ) Wheel Base 76.8 in. (  1 950 mm  ) Ground Clearance 10.6 in.
  • Page 13 SPECIFICATION UFORCE 600 Item CF600UU CF600UZ (EVAP) (Non-EVAP) Bore × Stroke 91 mm×89.2 mm Displacement 580cc Compression Ratio 10.68:1 Starting Type Electric start Lubrication Type Pressure / Splash lubrication Engine Oil: SAE 5W-40 / SAE 10W-40 / SAE 15W-40 Type...
  • Page 14 SPECIFICATION UFORCE 600 Item CF600UU CF600UZ (EVAP) (Non-EVAP) Front gear case Oil: Type SAE 80W-90 GL-5 Volume: Periodic Oil Change 8.45 oz (  2 50 mL  ) Rear gear case Oil: Type SAE 80W-90 GL-5 Volume Periodic Oil Change 13.52 oz (  4 00 mL  )
  • Page 15 SPECIFICATION UFORCE 600 Item CF600UU CF600UZ (EVAP) (Non-EVAP) Spark Plug Type DCPR8E (  N GK  ) Spark Plug Gap 0.031 in ~ 0.035 in (  0 .8 mm ~ 0.9 mm  ) Transmission CVT + Gearbox Gear Shift/Order Manual / L—H—N—R—P CVT Ratio 0.67~3.02...
  • Page 16 SPECIFICATION UFORCE 600 Item CF600UU CF600UZ (EVAP) (Non-EVAP) Tire Pressure: Front Suggest pressure: 10 PSI (70 kPa) Load > 195 kg: 11 PSI (80 kPa) Rear Suggest pressure: 14 PSI (100 kPa) Load > 195 kg: 17 PSI (120 kPa)
  • Page 17 SPECIFICATION UFORCE 600 Item CF600UU CF600UZ (EVAP) (Non-EVAP) Wheel Travel: Front Wheel Travel 7.87 in. (  2 00 mm  ) Rear Wheel Travel 7.87 in. (  2 00 mm  ) Electrical System: Ignition Electronic Charging Rectified A/C 600 Watt @ 5000 rpm...

  • Page 18: Operator Safety

    OPERATOR SAFETY Operator Safety General Safety Precautions WARNING Failure to heed the warnings contained in this manual can result in serious injury or death. This vehicle is not a toy and can be hazardous to operate. This vehicle handles differently from other vehicles, such as cars.
  • Page 19 OPERATOR SAFETY Equipment Modifications CFMOTO is concerned with the safety of our customers and for the general public. Therefore, we strongly recommend that consumers do not install on a vehicle, any equipment that may increase the speed or power of the vehicle, or make any other modifications to the vehicle for these purposes. Any modifications to the original equipment of the vehicle create a substantial safety hazard and increase the risk of body injury.
  • Page 20 OPERATOR SAFETY Avoid Gasoline Fires and Other Hazards Gasoline is extremely flammable and highly explosive. Fuel vapors can spread and be ignited by a spark or flame many feet away from the engine. To reduce the risk of fire or explosion, follow these instructions: •...
  • Page 21 OPERATOR SAFETY WARNING Gasoline is highly flammable and explosive under certain conditions. Allow the engine and exhaust system to cool before filling the tank. Always exercise extreme caution whenever handling gasoline. Always refuel with the engine stopped, and outdoors or in a well ventilated area. Never carry a plastic container with gasoline in the cargo area while riding.

  • Page 22: Owner Responsibilities

    OPERATOR SAFETY Owner Responsibilities Be Qualified and Responsible Read this Owner’s Manual and the warning decals on this vehicle carefully. Take a safety training course on open areas if available. Practice at low speeds. Higher speeds require greater experience, knowledge and suitable riding conditions.
  • Page 23 OPERATOR SAFETY Riding Carefully • This vehicle is not a toy and can be hazardous to operate. This vehicle handles differently from other vehicles such as motorcycles or cars. A collision or rollover can occur quickly, during abrupt maneuvers such as sharp turns, acceleration or deceleration, and driving on hills or over obstacles if you fail to take proper precautions.
  • Page 24 OPERATOR SAFETY Roll Over Protection System (  R OPS  ) • The ROPS on this vehicle meets the performance requirements of ISO 3471:2008. The ROPS can limit intrusions of outside objects and reduce your risk of injury in rollovers. • Always follow all safe operating practices outlined in this manual to avoid vehicle rollover.
  • Page 25 OPERATOR SAFETY • Never operate this vehicle on hills too steep for the vehicle or your abilities. Practice on small inclines. • Always follow proper procedures for climbing or going down hills. Never go over the top of any hill at high speed.
  • Page 26 OPERATOR SAFETY Safe Riding Gear Always wear clothing suited to the type of riding. Operating this vehicle requires wearing special protective clothing for comfort and to reduce the chance of injury: 1. A helmet is the most important piece of protective gear for safe riding.

  • Page 27: Safety Labels, Locations And Warnings

    OPERATOR SAFETY Safety Labels, Locations and Warnings Warning labels have been placed on the vehicle for your protection. Read and follow the instructions on each decal carefully. If a decal becomes illegible or comes off, contact your dealer to purchase a replacement.
  • Page 28 OPERATOR SAFETY Safety Labels...
  • Page 29 OPERATOR SAFETY Safety Labels...
  • Page 30 OPERATOR SAFETY Safety Labels...
  • Page 31 OPERATOR SAFETY Safety Labels...
  • Page 32 OPERATOR SAFETY Safety Labels...
  • Page 33 OPERATOR SAFETY Safety Labels...

  • Page 34: Potential Hazard Warnings

    OPERATOR SAFETY Potential Hazard Warnings WARNING POTENTIAL HAZARD: Operating this vehicle without proper instruction. WHAT CAN HAPPEN: The risk of an accident is greatly increased if the operator does not know how to operate the vehicle properly in different situations and on different types of terrain. HOW TO AVOID THE HAZARD: Beginning and inexperienced operators should complete a safety training course if offered by dealer.
  • Page 35 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Carrying more passengers than the rated capacity. WHAT CAN HAPPEN: A passenger not seated in the vehicle could be ejected from the vehicle unexpectedly or make contact with moving components, both of which can result in severe injury or death. HOW TO AVOID THE HAZARD: Never allow carrying more than one passengers.
  • Page 36 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Operating this vehicle without wearing approved helmet, eye protection, and protective clothing. WHAT CAN HAPPEN: Operating without an approved helmet increases the risk of a severe head injury or death in the event of an accident. Operating without eye protection could result in an accident and could increase the chance of a severe eye injury in the event of an accident.
  • Page 37 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Operating at excessive speeds. WHAT CAN HAPPEN: Excessive speed increases the operator’s chance of losing control, which can result in an accident. HOW TO AVOID THE HAZARD: Always operate at a speed that’s proper for the terrain, visibility and operating conditions, and your experience.
  • Page 38 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Failure to inspect the vehicle before operating. Failure to properly maintain the vehicle. WHAT CAN HAPPEN: Poor maintenance increases the possibility of an accident or equipment damage. HOW TO AVOID THE HAZARD: Always inspect your vehicle before each use to make sure it’s in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in the owner’s manual.
  • Page 39 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Failure to use extra caution when operating on unfamiliar terrain. WHAT CAN HAPPEN: Unfamiliar terrain may contain hidden rocks, bumps, or holes that could cause loss of control or overturn. HOW TO AVOID THE HAZARD: Travel slowly and use extra caution when operating on unfamiliar terrain.
  • Page 40 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Failure to use extra caution when operating on excessively rough, slippery or loose terrain. WHAT CAN HAPPEN: Operating on excessively rough, slippery or loose terrain could cause loss of traction or loss of control, which could result in an accident or overturn. HOW TO AVOID THE HAZARD: Do not operate on excessively rough, slippery or loose terrain until you've practiced and learned the skills necessary to control the vehicle on such terrain.
  • Page 41 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Climbing excessively steep hills or climbing hills improperly. WHAT CAN HAPPEN: Improper hill climbing could cause loss of control or overturn. HOW TO AVOID THE HAZARD: Never operate on hills too steep for the vehicle or for your abilities. Practice on smaller hills before attempting large hills.
  • Page 42 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Traveling down excessively steep hills. WHAT CAN HAPPEN: Improper downhill travel could cause loss of control or overturn. HOW TO AVOID THE HAZARD: Never operate on hills too steep for the vehicle or for your abilities. Practice on smaller hills before attempting large hills.
  • Page 43 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Improperly crossing hills and turning on hills. WHAT CAN HAPPEN: Improperly crossing or turning on hills could cause loss of control or overturn. HOW TO AVOID THE HAZARD: Use extra caution when turning on any hill. Avoid crossing the side of a steep hill. WHEN CROSSING THE SIDE OF A HILL: Always follow proper procedures as described in the owner's manual.
  • Page 44 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Stalling, rolling backwards while climbing a hill. WHAT CAN HAPPEN: The vehicle could overturn. HOW TO AVOID THE HAZARD: Maintain a steady speed when climbing a hill. IF ALL FORWARD SPEED IS LOST: Close the throttle. Apply the brake. When fully stopped, shift the gear selector to the park position. IF THE VEHICLE BEGINS ROLLING: Never apply engine power.
  • Page 45 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Improperly operating over obstacles. WHAT CAN HAPPEN: Operating over obstacles could cause loss of control or overturn. HOW TO AVOID THE HAZARD: Before operating in a new area, check for obstacles. Avoid operating over large obstacles such as rocks and fallen trees when possible.
  • Page 46 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Overloading the vehicle or carrying/towing cargo improperly. WHAT CAN HAPPEN: Overloading and towing can cause changes in vehicle handling, which could lead to loss of control or an accident. HOW TO AVOID THE HAZARD: Never exceed the stated load capacity for this vehicle. Cargo should be properly distributed and securely attached.
  • Page 47 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Operation the vehicle through deep or fast-flowing water. WHAT CAN HAPPEN: Tires may float, causing loss of traction and loss of control, which can lead to an accident or overturn. HOW TO AVOID THE HAZARD: Avoid operating through deep or fast-flowing water.
  • Page 48 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Improperly operating in reverse. WHAT CAN HAPPEN: The vehicle could collide with an obstacle or person, resulting in severe injury. HOW TO AVOID THE HAZARD: Before shifting into reverse gear, always check for obstacles or people behind the vehicle. When it's safe to proceed, back slowly.
  • Page 49 OPERATOR SAFETY WARNING POTENTIAL HAZARD: Operating the vehicle with improper modifications. WHAT CAN HAPPEN: Improper installation of accessories or modification of the vehicle may cause changes in handling which could lead to an accident. HOW TO AVOID THE HAZARD: Never modify the vehicle through improper installation or use of accessories. All parts and accessories added to the vehicle must be genuine parts or equivalent components designed for use on this vehicle, and they should be installed and used according to approved instructions.
  • Page 50 OPERATOR SAFETY WARNING Leaving the keys in the ignition can lead to unauthorized use of the vehicle, resulting in serious injury or death. Always remove the ignition key when the vehicle is not in use. WARNING After any overturn or accident, have an authorized dealer inspect the entire vehicle for possible damage, including ( ...
  • Page 51 CONTROLS AND FEATURES...

  • Page 52: Controls And Features

    CONTROLS AND FEATURES Controls and Features Occupant Protection Roll Over Protection System (ROPS) - (  1   ) ROPS cab frame helps to protect the occupants from injury in case of a rollover or other dangerous situation. Never put your hands and/or feet outside of the vehicle when driving. Safety Belt - ( ...
  • Page 53 CONTROLS AND FEATURES...

  • Page 54: Primary Controls

    CONTROLS AND FEATURES Primary Controls Hand Brake - (  1   ) This vehicle is equipped with an auxiliary hand brake, which is located at the left of steering wheel. Pull down the lever to apply the mechanical brakes and prevent vehicle movement. If the vehicle is driven without releasing hand brake, the speed will be abnormal.
  • Page 55 CONTROLS AND FEATURES Tilt Lever and Steering Wheel Lock - (  3   ) A tilt feature allows the steering wheel angle to be adjusted to fit the operator. Pull on the lever and adjust the steering wheel for comfort. Release the lever to lock the steering wheel tilt angle. Gear Shift Lever - ( ...
  • Page 56 CONTROLS AND FEATURES N – Neutral. In neutral position the engine power output is disengaged. R – Reverse. The reverse gear position allows the vehicle to go backwards. Speed is limited to 15mph (25 kph) in reverse. P – Park. The park position locks the gearbox to help prevent vehicle from movement.
  • Page 57 CONTROLS AND FEATURES Electronic Throttle Pedal - (  7   ) The Electronic throttle pedal is located to the right of the brake pedal. The throttle pedal controls engine rpm and vehicle speed. To control vehicle speed, press on the throttle pedal with your right foot.

  • Page 58: Secondary Controls

    CONTROLS AND FEATURES Secondary Controls Switch - (  8   ) 2WD / 4WD Switch This vehicle is equipped with an on-command “2WD”/”4WD” and front diff-lock “LOCK”/”4WD” switch on the dashboard. Select the appropriate drive mode according to terrain and conditions: 2WD - When the switch is on this position, power is supplied to the rear wheels only.
  • Page 59 CONTROLS AND FEATURES Main Light Switch The main light switch consists of 3 positions. Turn the switch to select the following functions: When the switch is on this position, head light, position light, tail light and instrument light are ‘on’. When the switch is on this position, position light / tail light will be ‘on’...
  • Page 60 CONTROLS AND FEATURES Dimmer Switch Dimmer switch consists of two positions, apply the related switch according to following function selection: When the switch is on this position, high beam works. When the switch is on this position, low beam works.
  • Page 61 CONTROLS AND FEATURES Horn Switch (If equipped-available only in select countries) Press this switch to sound the horn. ● When the switch rebounds back to this position, the horn will not sound. Hazard Switch (  I f equipped-available only in select countries  ) When the switch is on this position, front and rear turning light will flash.
  • Page 62 CONTROLS AND FEATURES Override Switch The engine is normally speed limited when operating in 4WD LOCK. If conditions require more engine power: Release the throttle, then press and hold the override button. The override indicator light will be ‘on’. Continue to press the button, then reapply the throttle. The engine will have full power.
  • Page 63 CONTROLS AND FEATURES Mode Switch: When the switch is on this position, the vehicle is in NORM ‘NORMAL’ mode. The dashboard display will also shift to ‘NORMAL’ mode. The vehicle will have a less aggressive NORMAL throttle response for smooth starts and is intended for flat trails, hard pack ground, etc.
  • Page 64 CONTROLS AND FEATURES...

  • Page 65: Vehicle Features

    CONTROLS AND FEATURES Vehicle Features Cup Holder - (  1   ) For holding beverages. Glove Box - (  2   ) The glove box is located in the front of passenger seat. A wired winch controller is located in the front glove box.
  • Page 66 CONTROLS AND FEATURES...
  • Page 67 CONTROLS AND FEATURES Cargo Box and Tilt Feature - (  7   ) Refer to the safety decals on the cargo box for load information. The cargo box has a release handle on each side that can be used to tilt the box (maximum angle is less than 45°) for maintenance or to dump material.
  • Page 68 CONTROLS AND FEATURES Seat Storage - (  9   ) This vehicle is equipped with storage boxes under the driver and passenger seats to store items and tools such as the funnel , fill hose and tool kit . The storage box under the driver seat is waterproof.
  • Page 69 CONTROLS AND FEATURES ECU and Fault Diagnosis Connector - (  1 0  ) and fault diagnosis connector are located behind the driver seat. Removal: Grasp the lower edge of ECU cover , pull out to release the grommet pin, then remove the cover. Installation: Insert the tabs into the corresponding holes, align the grommet pin and press.
  • Page 70 CONTROLS AND FEATURES Winch - (  1 1  ) This vehicle is equipped with a 3500-lb. winch, with a standard wired controller that is typically stored inside the front storage box. Only operate the winch when engine is running to keep the battery capacity.
  • Page 71 CONTROLS AND FEATURES Telematics BOX (T-BOX) (If equipped) - (  1 3  ) CFMOTO vehicles are equipped with an intelligent vehicle terminal T-Box . It build the communication bridge between the owner and vehicle through CFMOTO RIED APP. Please search and download CFMOTO RIED APP.

  • Page 72: Cvt System

    CONTROLS AND FEATURES CVT System This vehicle has a Continuously Variable Transmission ( CVT ) system that utilizes a drive belt and clutch pulleys to automatically vary transmission drive ratios, allowing infinite variability between the highest and lowest vehicle speeds with no discrete steps or shifts. The CVT system consists of a primary clutch ( 1 ), which is an advanced form of centrifugal clutch that is mounted to the engine crankshaft ( ...

  • Page 73: How To Avoid Cvt Drive Belt And Clutch Failures

    CONTROLS AND FEATURES How to Avoid CVT Drive Belt and Clutch Failures CVT clutch and belt life can be dramatically extended by avoiding these common operating mistakes: Causes CVT damage: Solution: Attempting to load the vehicle onto a truck bed or tall Shift transmission to low gear during loading of the trailer in high gear.
  • Page 74 CONTROLS AND FEATURES Causes CVT damage: Solution Stuck in mud or snow. Shift the transmission to low gear, and carefully use fast, aggressive throttle application to engage CVT. WARNING: Excessive throttle may cause loss of control and vehicle overturn. Climbing over large objects from a stopped position. Shift the transmission to low gear, and carefully use fast, brief, aggressive throttle application to engage the CVT.
  • Page 75 CONTROLS AND FEATURES...

  • Page 76: Dashboard Indicators And Warnings

    CONTROLS AND FEATURES Dashboard Indicators and Warnings 1 Turning light 6 Override indicator 11 EPS indicator Coolant temp. warning 2 Seat belt warning indicator 7 Position light indicator 3 Neutral indicator 8 Parking brake indicator 13 Oil pressure signal indicator 4 OPC indicator 9 ADJ - mode adjust button 14 EFI fault indicator...
  • Page 77 CONTROLS AND FEATURES Indicators and Warnings 1. Turning Light (If equipped) When switch turns to right turning light position, the right turning indicator will be on. When switch turns to left turning light position, the left turning indicator will be on. 2.
  • Page 78 CONTROLS AND FEATURES 8. Parking Brake Indicator This indicator displays when parking brake function is activated. 9. ADJ - Mode Adjust Button Use this key together with “SEL” key to set the information on dashboard. 10. Brake Fault Warning Indicator This indicator displays when brake fluid level is very low.
  • Page 79 CONTROLS AND FEATURES 14. EFI Fault Indicator This indicator displays when a fault occurs in the Electronic Fuel Injection system. Please stop the vehicle and contact your dealer to eliminate the fault, or it may result in serious engine damage. 15.
  • Page 80 CONTROLS AND FEATURES...
  • Page 81 CONTROLS AND FEATURES Dashboard Indicators and Warnings 16 Drive mode 19 Fuel gauge indicator 22 Engine RPM 17 Clock 20 Rider Information Center 18 Speedometer 21 Gear position indicator...
  • Page 82 CONTROLS AND FEATURES 16. Drive Mode Display the current drive mode, there are three modes, 2WD, 4WD and 4WD-LOCK. If the mode is not engaged successfully, the indicator will flash. 19. Clock Display the current time. This dashboard section can be adjusted to correct time by using the “ADJ” and “SEL”...
  • Page 83 CONTROLS AND FEATURES Dashboard Navigation / Settings / Adjustments Item Displays Operation Result Odometer Total Distance Short press Shifts to trip Trip Trip Trip Distance Short press Shifts to engine hour Engine hour Trip Trip Distance Long press Trip resets to zero Trip Distance Reset Engine hour Short press...

  • Page 84: Operating Your Vehicle

    OPERATING YOUR VEHICLE Operating Your Vehicle Break-In Period The break-in period for a new engine is very important. Careful treatment of a new engine at the beginning of ownership will result in more efficient performance and longer life. Perform the following procedures carefully: 1.
  • Page 85 OPERATING YOUR VEHICLE CAUTION During the break-in period: • Do not operate at sustained full throttle. Damage to engine parts or decrease engine life may result if excessive wide open throttle is used during the first 20 hours or 200 miles / 320 km of use. •...

  • Page 86: Pre-Ride Inspection

    OPERATING YOUR VEHICLE Pre-Ride Inspection Before each use of the vehicle, a best practice is to check the vehicle according to the “Perform daily before operating the vehicle” checklist in the maintenance section of this manual. WARNING If a proper inspection is not done before each use, severe damage to the vehicle, severe injury, or death could result.

  • Page 87: Foot Brake

    OPERATING YOUR VEHICLE Foot Brake Before operating the vehicle, push down on the pedal to apply the front and rear brakes. When pressed, the lever or pedal should feel firm. A soft brake pedal would indicate a possible fluid leak or low master cylinder fluid level, which must be corrected before riding.

  • Page 88: Shifting The Transmission

    OPERATING YOUR VEHICLE NOTE: Do not activate the starting system more than 10 seconds on each attempt. If the engine fails to start, release the start switch, pause a few seconds before the next attempt, then try the start switch again. Each attempt should be as short as possible to preserve battery energy.
  • Page 89 OPERATING YOUR VEHICLE Shifting Out of Park 1. Verify the throttle is closed. 2. Apply the foot brake and press the gear selector button. 3. Shift to the desired gear by moving the gear selector along the shift guide. Shifting: Neutral to High Gear 1.
  • Page 90 OPERATING YOUR VEHICLE Shifting: Low Gear to High Gear 1. Verify the throttle is closed and the vehicle is stopped completely. 2. Apply the foot brake. 3. Shift to ‘H’ by moving the gear selector along the shift guide. Shifting: to Reverse Gear 1.
  • Page 91 OPERATING YOUR VEHICLE Shifting: to Park 1. Verify the throttle is closed and the vehicle is stopped completely. 2. Apply the foot brake and press the gear selector button. 3. Shift to ‘P’ by moving the gear selector along the shift guide. Shake the vehicle forward and backward to verify that parking is engaged.

  • Page 92: Safe Operation - Driving Safely

    SAFE OPERATION - DRIVING SAFELY Safe Operation - Driving Safely Responsibilities of the Operator As the operator of this vehicle, your common sense, judgment, and abilities are the only factors that will prevent injury to yourself, to others around you, and/or damage to the vehicle or environment. Recreational, Group, and Distance Riding One of the benefits of this vehicle is that it can take you off-road away from most communities.
  • Page 93 SAFE OPERATION - DRIVING SAFELY Abrupt maneuvers or aggressive driving can cause rollovers or loss of control even in flat open areas. If the vehicle rolls over, any part of your body (  s uch as arms, legs, or head  ) outside of the cockpit can be crushed and trapped by the cage or other parts of the vehicle.
  • Page 94 SAFE OPERATION - DRIVING SAFELY • Sudden changes in terrain such as holes, depressions, banks, softer or harder ground or other irregularities may cause the vehicle to tip or become unstable. Observe the terrain ahead and slow down in areas of uneven terrain. This vehicle will handle differently when carrying or pulling a load: •...

  • Page 95: Practice Exercises

    SAFE OPERATION - DRIVING SAFELY Environment Off-road recreation is a privilege. Maintain your privilege by respecting the environment and the rights of others to enjoy it: • Chasing wildlife is illegal. Wildlife can die of exhaustion if chased by a motorized vehicle. •...
  • Page 96 SAFE OPERATION - DRIVING SAFELY Turning Exercise Turning is one of the most frequent causes of accidents. It is easier for the vehicle to lose traction or rollover if you turn too sharply, or go too fast. Slow down when you approach a turn. Practice turning: •...
  • Page 97 SAFE OPERATION - DRIVING SAFELY Braking Exercise Practice braking to get familiar with the brake response: • Practice braking at low speed first, then increase the speed. • Practice braking in straight line at different speeds and different braking forces. •...

  • Page 98: Operating Your Vehicle

    SAFE OPERATION - DRIVING SAFELY Operating Your Vehicle Off-Road Operation The very nature of off-road operation is dangerous. Any terrain which has not been specially prepared to carry vehicles presents an inherent danger where terrain substance, shape, and steepness are unpredictable.
  • Page 99 SAFE OPERATION - DRIVING SAFELY WARNING When driving downhill in reverse, gravity can increase the vehicle speed above the set limited reverse speed. Failure to use caution when operating in reverse can result in serious injury or death. NOTE: This vehicle is equipped with a reverse speed limiter function. In reverse operation, the engine RPM is limited, thus limiting the vehicle reverse speed.
  • Page 100 SAFE OPERATION - DRIVING SAFELY Beware of slippery surfaces such as rocks, grass, logs, etc., both in the water and on its banks. A loss of traction may occur. Do not attempt to enter the water at high speed. Water will affect the braking ability of your vehicle.
  • Page 101 SAFE OPERATION - DRIVING SAFELY Riding on Gravel, Loose Stones, or Other Slippery Surfaces Riding on gravel or loose stones is very similar to riding on ice. They affect the steering of vehicle, possibly causing it to slide and tip over especially at high speeds. In addition, braking distance may be affected. Remember that “gunning”...
  • Page 102 SAFE OPERATION - DRIVING SAFELY Uphill Driving Use the low gear (  L   ) for uphill driving. Due to its configuration, this vehicle has very good traction even while climbing, so much so that tip-over is possible before traction is lost. For example, it is common to encounter terrain situations where the top of the hill has eroded to a point that the hill peak rises very sharply.

  • Page 103: Hauling And Towing Loads

    SAFE OPERATION - DRIVING SAFELY Hauling and Towing Loads Your vehicle can help you perform a number of different light tasks ranging from snow removal, to pulling wood, or carrying cargo. This can change the vehicle handling. To prevent possible injury, follow the instructions and warnings in this manual and on the vehicle.
  • Page 104 SAFE OPERATION - DRIVING SAFELY Vehicle Settings When Carrying Loads If the total load approaches 1500 Ib. (680 kg), including weight of operator, passenger, cargo, accessories and trailer Towing Hitch Weight: • Inflate the tires to maximum pressure: Front: 11 PSI (  8 0 kPa  ) , rear : 17 PSI (  1 20 kPa  ) . •...
  • Page 105 SAFE OPERATION - DRIVING SAFELY WARNING Slack can cause a chain or cable to break and snap back, possibly causing injury. • When pulling a load, respect the maximum hauling capacity. • If pulling another vehicle, be sure that someone is controlling the pulled vehicle. They must brake and steer to prevent the vehicle from going out of control.
  • Page 106 SAFE OPERATION - DRIVING SAFELY • Always use low gear while towing to avoid clutch wear and belt issues. • Reduce speed when hauling or towing loads. • Never exceed the stated load capacity for this vehicle. • All loads must be secured before operation. Unsecured loads may shift and create unstable operating conditions, which could result in loss of control of the vehicle.
  • Page 107 SAFE OPERATION - DRIVING SAFELY • While towing, the vehicle should never exceed 10 mph (  1 6 km/h  ) towing a load on a level surface. Vehicle speed should never exceed 5 mph ( 8 km/h ) when towing loads in rough terrain, while cornering, or while ascending or descending a hill.

  • Page 108: Winch Operation

    SAFE OPERATION - DRIVING SAFELY Winch Operation (Select Markets) Your vehicle may be equipped with a winch that can pull certain capacities and types of loads. It is useful for vehicle self-recovery when stuck, assisting another vehicle in recovery, moving fallen trees, removing brush, etc.
  • Page 109 SAFE OPERATION - DRIVING SAFELY • Never allow children under 16 years of age to operate the winch. • Never attempt to “jerk” a load attached to the winch by moving the vehicle. • Never winch up or down, or to the sides at sharp angles. This can destabilize the winching vehicle and possibly cause it to move without warning.
  • Page 110 SAFE OPERATION - DRIVING SAFELY If winching at an angle is unavoidable, follow these precautions while operating: Look at the winch drum occasionally. Never let the winch cable “stack” or accumulate at one end of the drum. Too much cable at one end of the drum can damage the winch and cable. If cable stacking occurs, stop winching.
  • Page 111 SAFE OPERATION - DRIVING SAFELY BEFORE YOU BEGIN - Realize that each winching situation is unique: • Take your time to think through the winch operation you are about to perform. • Proceed slowly and deliberately. • Never hurry or rush during winching. •...
  • Page 112 SAFE OPERATION - DRIVING SAFELY WARNING: Never use a ‘recovery strap’ for winching. Recovery straps are designed to stretch and could release excessive energy that can result in SEVERE INJURY or DEATH if the strap or winch cable breaks. Use only undamaged tow straps or chains that do not stretch. 5.
  • Page 113 SAFE OPERATION - DRIVING SAFELY Vehicle Recovery Methods Vehicle Self-Recovery: A. Release the winch drum and pull out the required length of cable. B. Whenever possible, pick an anchor point that aligns the winch cable to the vehicle’s centerline as close as possible.
  • Page 114 SAFE OPERATION - DRIVING SAFELY Recovery of Another Vehicle: A. Release the winch drum and pull out the necessary length of cable. B. Attach the winch hook to the vehicle. Whenever possible, pick an anchor point on the stuck vehicle that aligns the winch cable to the winching vehicle’s centerline as close as possible.
  • Page 115 SAFE OPERATION - DRIVING SAFELY • A kinked winch cable made of wire rope that has been “straightened out”, even though it may look usable, has been permanently and severely damaged. It can no longer achieve its load capacity rating. Promptly discontinue use of a winch cable in this condition. •...
  • Page 116 SAFE OPERATION - DRIVING SAFELY B. Pull out the winch cable that is wrapped unevenly onto the drum. C. Re-engage the winch drum. D. Have an assistant pull the winch cable hook strap tightly to apply about 100 lbs. (45 kg) of tension. E.
  • Page 117 SAFE OPERATION - DRIVING SAFELY • Never use recovery straps with your winch. This is a form of shock loading. Recovery straps are designed to stretch and can store energy. Stored energy in the recovery strap is released if a failure occurs, making the event even more hazardous.

  • Page 118: Maintenance

    MAINTENANCE Maintenance Careful periodic maintenance will help keep your vehicle in the safest, most reliable condition. Inspection, adjustment, and lubrication of important components are explained in the maintenance schedule. Inspect, clean, lubricate, adjust, and replace parts as necessary. When inspection reveals the need for replacement parts, always use genuine parts available from your dealer.
  • Page 119 MAINTENANCE WARNING Procedures marked as ‘■’ means if repair is required, have an authorized dealer perform repairs that involve this component or system. Improperly performing the procedure could result in component failure and lead to serious injury or death. KEY POINTS OF LUBRICATION SCHEDULE: Check all components at the intervals outlined in the Periodic Maintenance Schedule.

  • Page 120: Pre-Ride Maintenance Checklist

    MAINTENANCE Pre-Ride Maintenance Checklist Perform these inspections before operating the vehicle: Maintenance before operation Item Hour Calendar Miles (  k m  ) Remarks ■ Steering system Pre-Ride ■ Throttle return Pre-Ride Front suspension and axles Pre-Ride Visually inspect, test, Rear suspension and axles Pre-Ride or check components.
  • Page 121 MAINTENANCE Maintenance before operation Item Hour Calendar Miles (  k m  ) Remarks Inspect. If deposits are visible, clean ► Air box sediment tube Pre-Ride intake tubes, air box, and replace air filter. Inspect. If deposits are visible, drain / ►...

  • Page 122: Break-In Maintenance Checklist

    MAINTENANCE Break-In Maintenance Checklist Perform these maintenance items when the vehicle break-in is completed: Break-in Maintenance (  P erform at the interval that arrives first  ) Item Hour Calendar Miles (  k m  ) Remarks Lubricate all grease General lubrication 200 ( ...
  • Page 123 MAINTENANCE Break-in Maintenance (  P erform at the interval that arrives first  ) Item Hour Calendar Miles (  k m  ) Remarks ► Brake pads 200 (  3 20  ) Inspect pad thickness. Check terminals, Battery 200 (  3 20  ) clean, test battery condition if required.

  • Page 124: Periodic Maintenance Schedule

    MAINTENANCE Periodic Maintenance Schedule Perform maintenance at the interval that arrives first after the 20-hour break-in period: Periodic Maintenance Intervals (  P erform at the interval that arrives first  ) Item Hour Calendar Miles (  k m  ) Remarks ► Brake pads Monthly 100 ( ...
  • Page 125 MAINTENANCE Periodic Maintenance Intervals Item (  P erform at the interval that arrives first  ) Hour Calendar Miles (  k m  ) Remarks Inspect level. Change ► Front gear case oil 100h 1000 (  1 600  ) yearly if hours or distance interval is not met.
  • Page 126 MAINTENANCE Periodic Maintenance Intervals Item (  P erform at the interval that arrives first  ) Hour Calendar Miles (  k m  ) Remarks Inspect; clean external surfaces. Clean more ► Radiator 500 (  8 00  ) frequently if subjected to severe use.
  • Page 127 MAINTENANCE Periodic Maintenance Intervals (  P erform at the interval that arrives first  ) Item Hour Calendar Miles (  k m  ) Remarks Inspect. Replace as ► ■ CVT drive belt 100h 1000 (  1 600  ) necessary. See dealer for service.
  • Page 128 MAINTENANCE Periodic Maintenance Intervals Item (  P erform at the interval that arrives first  ) Hour Calendar Miles (  k m  ) Remarks Inspect fuel tank, cap, fuel ● Fuel system 100h 500 (  8 00  ) pump and fuel pump relay. Inspect;...
  • Page 129 MAINTENANCE Periodic Maintenance Intervals Item (  P erform at the interval that arrives first  ) Hour Calendar Miles (  k m  ) Remarks Inspect for noise or ► ■ Wheel bearings 100h 1500 (  2 400  ) looseness. Replace as necessary.
  • Page 130 MAINTENANCE Periodic Maintenance Intervals (  P erform at the interval that arrives first  ) Item Hour Calendar Miles (  k m  ) Remarks Inspect fluid for color ► Brake fluid 200h 1000 (  1 600  ) change. Change fluid every two years. Inspect for proper rpm.

  • Page 131: Maintenance Procedures

    MAINTENANCE Maintenance Procedures Air Filter Check and change the air filter at the intervals outlined in the Maintenance Schedule. The air filter element should be cleaned or replaced more often if the vehicle is used in extremely dusty or wet areas. Each time air filter maintenance is performed, check the air inlet of the air filter box for obstructions and debris.
  • Page 132 MAINTENANCE Air Filter Maintenance 1. Lift the rear cargo box. 2. Remove the six clasps and remove the air filter cover (1). 3. Remove the four screws and the sponge filter element (  2   ) . 4. Inspect the sponge filter element (  2   ) and confirm it could be reinstalled, clean it if necessary.
  • Page 133 MAINTENANCE Drying the Air Filter Housing after Submersion If water has been ingested into the air filter housing, Drain the air filter housing, remove the air filter, and thoroughly dry the components. Do not use compressed air on the paper air filter. Contact your dealer if vehicle performance issues exist.
  • Page 134 MAINTENANCE Engine Air Intake Deflector 1. Remove the right access cover (1). 2. The filter element (2) behind the engine air intake deflector is visible. 3. Take out the filter element (2) ,inspect and check if it can be reinstalled. Clean the filter element (2) if necessary, or install with new filter element if necessary...
  • Page 135 MAINTENANCE Inspect The Engine Oil Level Always inspect and change the engine oil at the intervals outlined in the Maintenance Schedule. 1. Place vehicle on level ground with transmission in park. 2. Start the engine and idle for 30 seconds, then stop the engine.
  • Page 136 MAINTENANCE Change the Engine Oil 1. Place vehicle on level ground with the transmission in park. 2. Start the engine and warm for (  2 ~3  ) minutes, then stop the engine. 3. Place a pan under the engine oil drain hole to collect the used engine oil.
  • Page 137 MAINTENANCE 15. Use a dry and clean cloth to wipe the area around magnetic drain bolt. 16. (Filling option 1) Add the recommended type of oil into oil dipstick hole using the funnel, funnel extension tube and tube adapter that are supplied in the tool kit with the vehicle. Keep oil level in the specified range.
  • Page 138 MAINTENANCE Engine Valve Clearance Adjustment The intake and exhaust valve clearances change with use of the vehicle, which can result in improper fuel/air supply or engine noise. To prevent this, the valve clearances must be adjusted according to the maintenance schedule. This adjustment should be performed by a professional service technician. Contact your dealer for service.
  • Page 139 MAINTENANCE Front and Rear Gear Case Inspect the front and rear gear case for any leaks before operating the vehicle, if found any leaks, stop operating the vehicle and contact with your dealer for inspection and service. Change the Front and Rear Gear Case Oil 1.
  • Page 140 MAINTENANCE 9. Mount the filling bolt and washer (  3   ) . Torque for filling bolt: 18.4 ft-lb. (  2 5 N·m  ) 10. Dispose the used oil in a proper way. 11. The oil replacement method is the same for both front and rear gear cases.
  • Page 141 MAINTENANCE Front and Rear Axle Boots The front and rear axle boots (  1   ) must be checked for holes or wear before operating. If any damage is found, have your dealer repair the vehicle.
  • Page 142 MAINTENANCE What to do if water collects in the CVT housing If the vehicle was submerged in water deep enough that water has entered the CVT housing, remove the drain bolt (  1   ) at the bottom of the housing to drain the water from the case. Water drain bolt torque: 18.4 ft-lb.(25 N•m) CAUTION If water drains from the CVT housing after removing the bolt, have your dealer inspect the vehicle, as...
  • Page 143 MAINTENANCE Cooling System Inspect coolant level ≤120° 1. Place vehicle on level ground with the transmission in park. 2. Wait for the engine cooling down to ambient temperature, then inspect the coolant level. 3. Release the LH & RH hood clasps, then turn up the hood. 4.
  • Page 144 MAINTENANCE Change the Coolant WARNING Never remove the radiator cap If the engine is hot. Wait for the engine to cool down before removing the radiator cap. Hot coolant can cause serious burns. 1. Place vehicle on level ground with the transmission in park. 2.
  • Page 145 MAINTENANCE 9. During filling coolant, unscrew the coolant drain bolt to release residual air inside the coolant hose until only fluid flows out, then screw back in and tighten the drain bolt. Drain Bolt Torque: 7.4 ft-lb. (  1 0 N·m  ) 10.
  • Page 146 MAINTENANCE Recommended antifreeze: Any high quality ethylene glycol antifreeze containing corrosion inhibitors for aluminum engines. CFMOTO recommended coolant freeze protection level: -35ºC. Antifreeze and distilled water mixing ratio: 1:1 Total coolant capacity (without reservoir capacity): 3.8 qt. (3.6 L) Coolant changing capacity (without reservoir capacity): 3.7 qt. (3.5 L) Reservoir capacity: 0.32 qt (0.3 L) ~ 0.62 qt (0.59 L) Lower mark: 0.32 qt (0.3L);...
  • Page 147 MAINTENANCE Spark Plug(  s   ) The spark plug (  1   ) is an important engine component that is easy to inspect. The color and condition of the spark plug can indicate the condition of the engine. The ideal color on the insulator around the center electrode is a medium-to-light tan color for an engine that is being operated normally.
  • Page 148 MAINTENANCE Spark Plug Removal and Inspection 1. Place vehicle on level ground with transmission in park. 2. Lift the rear cargo box. 3. Remove the spark plug cap.(Spark plug is located under the rear cargo box on the engine magneto side.) 4.
  • Page 149 MAINTENANCE Spark Plug Removal to Expel Water from the Engine If water has been ingested into the engine, it is important to remove the water as soon as possible by removing the spark plug(  s   ) and using the starter system to rotate the engine for a short period to expel water out of the cylinder( ...
  • Page 150 MAINTENANCE Exhaust Pipe Spark Plug Arrestor Clean the carbon deposits from the spark arrestor periodically. Blocked spark arrestor will decrease the engine power. After driving through mud or water, inspect the spark arrestor and clean it if necessary. WARNING The exhaust system temperature is very high just after operation.
  • Page 151 MAINTENANCE Battery This vehicle is equipped with a 12 volt / 30 Amp-hour, sealed low maintenance battery (  A   ) . Therefore, it is not necessary to check the electrolyte or add distilled water into the battery. If the battery seems to be discharged, cover is damaged, or other problem exists, contact your dealer.
  • Page 152 MAINTENANCE Battery Removal Place vehicle on level ground with the transmission in park. Turn off the stop switch, turn the key to the OFF position, make sure the ignition system is in power off condition for the vehicle. Lift up the rear cargo box. Remove the black negative wire ( - ).
  • Page 153 MAINTENANCE Battery Installation Place vehicle on level ground with the transmission in park. Turn off the stop switch, turn the key to the OFF position, make sure the ignition system is in power off condition for the vehicle. Put the battery in place. Install the battery fixing bracket.
  • Page 154 MAINTENANCE Battery Charging Remove battery. Connect the charger with the positive and negative end of battery. Switch on the charger. NOTE: It’s recommended to charge the battery with current 10% of the battery amp-hour capacity. Disconnect the charger after finishing charging. Separate the charger and battery.
  • Page 155 MAINTENANCE Brakes Brake Fluid Level Inspection Before riding, check that the brake fluid level is above the ≤120° low mark and replenish whenever necessary. The brake fluid reservoir is located under the front access cover. Insufficient brake fluid may let air enter the brake system, possibly causing the brakes to become ineffective.
  • Page 156 MAINTENANCE level to gradually go down. A low brake fluid level may indicate worn brake pads or brake system leakage. Therefore, be sure to check the brake pads for wear before checking the brake system for leakage. • Have your dealer check the cause if the brake fluid level goes down unexpectedly.
  • Page 157 MAINTENANCE Brake Fluid Change Complete brake system fluid replacement should be performed only by trained service personnel. Have your dealer replace the following components during periodic maintenance, or when they are damaged or leaking: • Replace the brake hoses every four (  4   ) years. WARNING An over-full master cylinder may cause brake drag or brake lockup, which could result in an accident causing serious injury or death.
  • Page 158 MAINTENANCE Suspension Lubricating and Adjustment Lubricate the front and rear swing arm bushing, and rear stabilizer bar. Add lubricating grease into grease nipple (  1   ) with a grease gun until it begins to flow from bushing. NOTE: There are 4 grease nipples on front swing arms, and 6 grease nipples on the rear swing arms, and 2 grease nipples on the rear stabilizer bar, they are symmetrical in left and right.
  • Page 159 MAINTENANCE Shock Absorber Adjustment When riding on rough terrain conditions, using the hitch to tow, or carrying the maximum weight of people and cargo, increase the spring preload to get firmer riding. Decrease the spring preload as necessary for rough or soft terrain, to get smooth riding.
  • Page 160 MAINTENANCE Wheels Tire Pressure Before operating the vehicle, use tire pressure pen to inspect the tire pressure: Front tire: When the load is less than 195 kgs: 10 PSI (70 kPa) When the load is more than 195 kgs: 11 PSI (80 kPa) Rear tire: When the load is less than 195 kgs: 14 PSI (100 kPa) When the load is more than 195 kgs: 17 PSI (120 kPa)
  • Page 161 MAINTENANCE Change the Wheel Disassembling 1. Place vehicle on level ground. 2. Lift the vehicle and support the vehicle securely under the frame using a jack or other suitable tool so the wheel is off the ground. 3. Remove the hexagon slotted wheel nut (  1   ) . 4.
  • Page 162 MAINTENANCE Electrical Fuse Box The fuse box is located under the front hood. If a fuse is blown, turn off the main switch, install a new fuse with specified amperage. Turn on the main switch. If fuse blows again immediately, contact your dealer. Electronic relays mounted in the fuse box operate all system functions of the vehicle.
  • Page 163 MAINTENANCE Main Fuse and EPS Fuse A 40 Amp main fuse and a 40 Amp EPS (1) fuse are located next to the battery. If the fuse is blown, turn off the main switch and install a new fuse of the specified amperage. Turn on the main switch. If the fuse immediately blows again, please contact your dealer.
  • Page 164 MAINTENANCE Headlight Adjustment To adjust the headlight: Take off the LH & RH clasps and open front hood. Adjust the adjustment screw ( 1 ) to adjust the high beam direction vertically. Adjust the adjustment screw (  2   ) to adjust low beam direction vertically.
  • Page 165 MAINTENANCE Safety Belt This vehicle is equipped with three point safety belts for driver and passenger. Please make sure all safety belts are fastened safely before operating the vehicle. WARNING Falling from a moving vehicle will lead to serious injury or death.
  • Page 166 MAINTENANCE Always inspect all seat belts that can work normally before every operation of the vehicle. 1. Insert the lock plug into the lock catch until it sounds a click. The lock plug can be inserted smoothly. Click sound means it is fastened safely.

  • Page 167: Cleaning And Storage

    CLEANING AND STORAGE Cleaning and Storage Washing the Vehicle Keeping your vehicle clean will not only improve its appearance, but it can also extend the life of various components. With a few precautions, your vehicle can be cleaned much like an automobile: •...
  • Page 168 CLEANING AND STORAGE Waxing the Vehicle Your vehicle can be waxed with any non-abrasive automotive paste wax. Avoid the use of harsh cleaners since they can scratch the body finish. CAUTION Certain products, including insect repellant and other chemicals, will damage plastic surfaces. Use caution when using these products near plastic surfaces.
  • Page 169 CLEANING AND STORAGE Check Fluid Levels Inspect the following fluid levels and change if necessary: • Front gear case • Rear gear case • Brake fluid (  c hange every two years or as required if fluid looks dark or contaminated  ) •...
  • Page 170 CLEANING AND STORAGE ‘Fog’ the Engine • Remove the rear access cover to access the spark plug(  s   ) . • Remove the spark plug(  s   ) , rotate the piston to the bottom of its stroke, and pour approximately 2 oz.

  • Page 171: Transporting The Vehicle

    CLEANING AND STORAGE Transporting the Vehicle Follow these procedures when transporting the vehicle: • Turn off the engine and remove the key to prevent loss during transporting. • Ensure the fuel cap is installed correctly and secure. • Ensure the seat is installed correctly and secure. •...

  • Page 172: Vehicle Issue Diagnosis

    VEHICLE ISSUE DIAGNOSIS Vehicle Issue Diagnosis This section is intended to guide an average owner to simple items that could cause operating problems. Diagnosis of vehicle issues may require the experience of a dealership technician. Please contact your dealer if a solution is not apparent. Engine Does not Turn Over Possible Cause Solution...

  • Page 173: Engine Stops Or Loses Power

    VEHICLE ISSUE DIAGNOSIS Engine Stops or Loses Power Possible Cause Solution Clean radiator screen and external core. clean Overheated engine engine exterior. See your dealer Out of fuel Refuel with minimum 89 octane unleaded fuel Kinked or plugged fuel tank vent line Inspect and replace.

  • Page 174: Engine Turns Over, Fails To Start

    VEHICLE ISSUE DIAGNOSIS Engine Turns Over, Fails to Start Possible Cause Solution Engine turns over, Fails to start Refuel Clogged fuel filter Inspect and replace as necessary Water is present in fuel Replace with 89 minimum octane unleaded fuel Fuel pump is inoperative Inspect pump and fuse;...

  • Page 175: Engine Backfires

    VEHICLE ISSUE DIAGNOSIS Engine Backfires Possible Cause Solution Weak spark from spark plugs Inspect and replace spark plugs as necessary Incorrect spark plug gap or heat range Set gap to specs or replace plugs Old or non-recommended fuel Replace with minimum 89 octane unleaded fuel Incorrectly installed spark plug wires See your dealer Incorrect ignition timing...
  • Page 176 VEHICLE ISSUE DIAGNOSIS Possible Cause Solution Reverse speed limiter malfunction See your dealer Electronic throttle control malfunction See your dealer Other mechanical failure See your dealer Possible Lean or Rich fuel mixture See your dealer Low or contaminated fuel Add or change fuel, clean the fuel system Low octane fuel Replace with minimum 89 octane unleaded fuel Clogged fuel filter...

  • Page 177: Efi Malfunction Indicator Light

    VEHICLE ISSUE DIAGNOSIS EFI Malfunction Indicator Light The Electronic Fuel Injection system on your vehicle contains a self-diagnostic feature that will illuminate the malfunction indicator light (  M IL  ) if it detects a problem. When this indicator flashes, please contact your dealer.

  • Page 178: Eps Malfunction Indicator Light

    VEHICLE ISSUE DIAGNOSIS EPS Malfunction Indicator Light The Electronic Power Steering system on your vehicle contains a self-diagnostic feature that will illuminate the malfunction indicator light (  M IL  ) if it detects a problem,when this indicator flashes, please contact your dealer.

  • Page 179: Electronic Power Steering ( Eps ) Fault Diagnosis And Solution

    VEHICLE ISSUE DIAGNOSIS Electronic Power Steering ( E PS ) Fault Diagnosis and Solution     1. C h e c k w h e t h e r w i r e 1. Wire connectors have bad contact or are connectors and pins are disconnected fully inserted...

  • Page 180: Cfmoto Limited Warranty

    CFMOTO LIMITED WARRANTY FOR USA CFMOTO Limited Warranty Dear Customer, Thank you for purchasing a CFMOTO product, if any component on your vehicle is found to be defective in materials or workmanship within the terms and conditions of this Limited Warranty, the defective component will be repaired or replaced ( ...
  • Page 181 CFMOTO LIMITED WARRANTY FOR USA A. A 30-DAY WARRANTY coverage period applies to all new CFMOTO vehicles in relation to the vehicle’s: • Battery • Spark Plugs • Air Filters • Oil and Fuel Filters B. A 90-DAY WARRANTY coverage period applies to all new CFMOTO vehicles in relation to the vehicle’s: •...
  • Page 182 CFMOTO LIMITED WARRANTY FOR USA 3. EXCLUSIONS FROM WARRANTY COVERAGE: Any Damage resulting from the following acts or circumstances is not covered by the CFMOTO POWERSPORTS, Inc., Limited Warranty: • Fire • Collision • Theft • Unavoidable natural disasters • Improper storage or transportation •...
  • Page 183 CFMOTO LIMITED WARRANTY FOR USA • The complete model and serial number as shown on the original warranty document must be provided. • The name and address of the existing and new owners must be provided. • The original delivery date of the vehicle must be provided. •...
  • Page 184 CFMOTO LIMITED WARRANTY FOR USA 9. COMMERCIAL USE. The duration of the warranty for commercial use shall be limited to a period of six (6) months instead of one year for recreational use. All other conditions and limitations shall apply. 10.
  • Page 185 CFMOTO LIMITED WARRANTY FOR USA California Evaporative Emissions Control Warranty Statement Your Warranty Rights and Obligations INTRODUCTION: The California Air Resources Board (CARB) and CFMOTO Powersports, Inc. (CFMOTO) are pleased to explain the evaporative emissions control system warranty on your 2020 and later-model year off-highway recreation vehicles (OHRVs).
  • Page 186 CFMOTO LIMITED WARRANTY FOR USA exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. As an OHRV owner, you should also be aware that CFMOTO may deny you warranty coverage if your OHRV or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

  • Page 187: U.s.a. Epa And Carb Emissions Control Limited Warranty

    CFMOTO LIMITED WARRANTY FOR USA U.S.A. EPA and CARB Emissions Control Limited Warranty This emissions limited warranty is in addition to the CFMOTO Powersports, Inc. standard limited warranty for your vehicle. CFMOTO Powersports, Inc. warrants that at the time it is first purchased, this emissions-certified vehicle is designed, built and equipped so it conforms to applicable U.S.
  • Page 188 CFMOTO LIMITED WARRANTY FOR USA The following parts are considered emission-related components for evaporative emissions: ● Fuel Tank ● Vacuum Control Diaphragms* ● Fuel Cap ● Control Cables* ● Fuel Line ● Control Linkages* ● Fuel Line Fittings ● Purge Valves ●...
  • Page 189 CFMOTO LIMITED WARRANTY FOR USA ALL IMPLIED WARRANTIES (  I NCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE  ) ARE LIMITED IN DURATION TO THE WARRANTY PERIOD DESCRIBED HEREIN. CFMOTO POWERSPORTS, INC. DISCLAIMS ALL EXPRESS WARRANTIES NOT STATED IN THIS WARRANTY.

  • Page 190: Noise Control System And Tampering

    CFMOTO LIMITED WARRANTY FOR USA Noise Control System and Tampering Warranty time period: 1,865 miles (  3 000 km  ) Federal law prohibits the following acts or causing thereof: 1. The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement, of any device or element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use or;...

  • Page 191: Change Of Ownership

    CFMOTO LIMITED WARRANTY FOR USA Change of Ownership If you sell your vehicle, any valid remainder of the warranty can be transferred to the new owner. Please record the details of the exchange below and inform an authorized CFMOTO dealer: Change of Original Purchaser 2nd Owner...
  • Page 192 Change the Engine Oil ...........136 Accessory Power Ports ..........65 Change the Wheel ..........161 Age Restrictions ............18 Cleaning and Storage ..........167 Air Filter Maintenance ..........132 Cleaning the Radiator ..........146 Avoid Carbon Monoxide Poisoning ......19 Controls and Features ..........52 Avoid Gasoline Fires and Other Hazards ....20 Cooling System ............143 Cup Holder ...............65 Battery ..............151...
  • Page 193 Engine turns over, Fails to start ......175 Introduction ..............10 Engine Turns Over, Fails to Start ......174 Engine Valve Clearance Adjustment ......138 Key Switch ...............56 EPS Malfunction Indicator Light ......178 Know Your Vehicle ...........18 Equipment Modifications ..........19 EVAP System .............6 LH & RH Front Hood Clasps ........65 Exhaust Pipe Spark Plug Arrestor ......150 Main Fuse and EPS Fuse ........163 Foot Brake ...............87...
  • Page 194 Responsibilities of the Operator .......92 Riding Carefully ............23 Telematics BOX (T-BOX) .........71 Roll Over Protection System (  R OPS  ) .....24 Terrain Conditions ............24 Throttle ..............86 Safe Operation - Driving Safely .......92 Tilt Lever and Steering Wheel Lock ......55 Safe Riding Gear .............26 Transporting the Vehicle ........171 Safety Belt .............165 Safety Labels, Locations and Warnings ....27...
  • Page 195 5ASV-380101-6G01-13 US228 MANUFACTURED BY: ZHEJIANG CFMOTO POWER CO., LTD. ZHEJIANG Add:NO.116,Wuzhou Road, Yuhang Economic Development Zone,Hangzhou 311100,Zhejiang Province,China Tel:86-571-86258863 Fax:+86-571-89265788 E-mail:service@cfmoto.com.cn CFMOTO http://global.cfmoto.com DISTRIBUTED BY: CFMOTO POWERSPORTS INC. 3555 Holly Lane N. Suite #30, Plymouth MN, 55447, USA POWER Toll free: (888) 8-CFMOTO (823-6686) Tel: (1) 763-398-2690 Fax: (1) 763-398-2695 www.cfmotousa.com...

This manual is also suitable for:

Uforce 600Cf600uz

Table of Contents