Table of Contents
Advertisement
The selected address displays the Device Port and (EKI serial device server
physical serial port) and the system port which will be the VCOM port for the PC.
7.
From the network address list, select the address options to map.
8.
Click Map Selected Ports to set the configuration.
Once the mapping function is initialized, a successful mapping process results
in the virtual mapping of the designated physical serial port and VCOM PC port.
See the following figure.
EKI-1526(TI) | 1528(TI) User Manual
Selected Options
Figure 5.2 Selecting Auto Mapping
Figure 5.3 Mapping Selected Ports
Figure 5.4 Viewing VCOM Mapping Results
52
Device Port
System
Advertisement
Table of Contents
