Table of Contents
Advertisement
6-5
Power Supply
The SuperServer 6017R-TDAF has a single 600 watt power supply, which is auto-
switching capable. This enables it to automatically sense and operate with a 100v
- 240v input voltage.
Power Supply Failure
If the power supply module fails, the system will shut down and you will need to
replace the module. Replacements can be ordered directly from Supermicro (see
contact information in the Preface). As there is only one power supply module in
the server, power must be completely removed before removing and replacing the
power supply for whatever reason.
Replacing the Power Supply
1. First turn the power switch on the control panel off, then unplug the power
cord from the system. Replace with the same model, which can be ordered
directly from Supermicro.
2. Remove the screws that secure the power supply to the chassis then pull the
module straight out with the handle provided. The power supply wiring was
designed to detach automatically when the module is pulled from the chassis.
3. Carefully insert the new power supply into the open bay and push it com-
pletely into the chassis.
4. Secure it to the chassis with the screw you removed previously, then recon-
nect the AC power cord and press the power button on the control panel to
restart the system.
Chapter 6: Advanced Chassis Setup
6-9
Advertisement
Table of Contents
