Table of Contents
Advertisement
All JF1 wires have been bundled into single keyed ribbon cable to simplify their con-
nection. Connect one end of this cable to JF1 and the other end to the Control Panel
printed circuit board, located just behind the system status LEDs in the chassis.
See the Connector Defi nitions section in this chapter for details and pin descrip-
tions of JF1.
Figure 5-2. Front Control Panel Header Pins (JF1)
5-4
I/O Ports
The I/O ports are color coded in conformance with the PC 99 specifi cation. See
Figure 5-3 below for the colors and locations of the various I/O ports.
1
1. COM1 Port
2. USB Port 0
3. USB Port 1
4. Dedicated IPMI LAN
5. USB Port 2
Chapter 5: Advanced Serverboard Setup
Figure 5-3. Rear Panel I/O Ports
4
6
3
5
7
8
2
Backplane I/O Ports
6. USB Port 3
7. LAN Port 1
8. LAN Port 2
9. VGA Port
10. UID Switch
5-7
1
9
1 0
Advertisement
Table of Contents
