System I/O; Rco-3000 - C&T Solution RCO-3000 Series User Manual

Chapter 1: Product Introductions

1.3 System I/O

1.3.1 RCO-3000

Front Panel
ATX power on/off switch
Press to power-on or power-off the system
Reset switch
Press to reset the system
AT/ATX mode select switch
Used to select AT or ATX power mode
SIM card
Used to insert SIM card
COM port
COM1 ~ COM2 support RS232/422/485 serial
device
USB 2.0 port
Used to connect USB 2.0/1.1 device
Universal I/O Bracket
Used to customized I/O output
RCO-3000 | User's Manual
HDD port
Removable 2.5" SATA HDD Area
Power LED
Indicates the power status of the system
HDD LED
Indicates the status of the hard drive
Watchdog LED
Indicates the status of the watchdog active
GPIO LED
Indicates the status of the customer define
Ethernet LEDs
Indicates the status of the LAN active
12