C&T Solution RCO-3000 Series User Manual page 76

Chapter 4: BIOS Setup
■ Serial Port 2 Configuration
 Serial Port
This item allows you to enable or disable serial port.
 Change Settings
This item allows you to change the address & IRQ settings of the specified serial port.
 Device Type Select
Change the Serial interface. Select <RS232> ,<RS422 Full Duplex> or <RS485 Half Duplex> interface.
■ Serial Port 3 Configuration
 Serial Port
This item allows you to enable or disable serial port.
 Change Settings
This item allows you to change the address & IRQ settings of the specified serial port.
 Device Type Select
Change the Serial interface. Select <RS232> ,<RS422 Full Duplex> or <RS485 Half Duplex> interface.
RCO-3000 | User's Manual
76