Chapter 4: BIOS Setup
4.3.11 Intel(R) Ethernet Connection I218-LM-XX:XX:XX:XX:XX:XX
■ NIC Configuration
Press enter to configure the network device port.
Link Speed
Use this item to specify the port speed used for the selected boot protocol. Select <Auto
Negotiated>, <10 Mbps Half>, <10 Mbps Full>, <100Mbps Half> or <100 Mbps Full>.
Wake On LAN
Enables the server to be powered on using an in-band magic packet.
■ Blink LEDs
Use this item to identify the physical network port by blinking the associated LED.
■ Link Status
Use this item to specify the port speed used for the selected boot protocol. Select <Auto Negotiated>,
<10 Mbps Half>, <10 Mbps Full>, <100 Mbps Half> or <100 Mbps Full>.
RCO-3000 | User's Manual
83