Table of Contents
Advertisement
CT-CIB61 Intel® 3rd Generation Core™ Processor i7/i5/i3 COM Express Type 6 Module
IV. Features & Interfaces
4.1
Processor
The CT-CIB61 with Socket G supports Intel® 3
rPGA988B type processor. This is the next generation of 64-bit and multi-core
mobile processors built on 22-nanometer process technology. This processor
is designed for a two-chip platform, which consists a processor and Platform
Controller Hub (PCH). The processor includes Integrated Display Engine,
Processor Graphics and Integrated Memory Controller. Such platform enables
higher performance, lower cost, easier validation and improved x-y footprint.
4.2
BIOS
The AMI uEFI BIOS, 8MB SPI Flash Rom is used in CT-CIB61 module.
4.3
System Memory
The Integrated Memory Controller (IMC) of the processor supports DDR3
protocols with two independent, 64-bit wide channels. Each channel allows the
data transfer rate of 1333/1600MHz with a 204-pin SODIMM socket. With
standard 1-Gb, 2-Gb and 4-Gb DDR3 DRAM technologies, these two
SODIMM sockets on the CT-CIB61 support the maximum memory of 32GB.
However, the memory size of the first channel, CN3, must be greater or equal
to the memory size of the second channel, CN4.
4.4
Chipset
The Platform Controller Hub (PCH) used on CT-CIB61 is QM77. The PCH
provides extensive I/O support with two COM™ Express connectors.
4.5
Graphics
The graphics is integrated in the processor. There are three display pipes in
the Graphic Engine. Each of them operates independently and sends display
data to the PCH over the Intel Flexible Display Interface, Intel® FDI. The PCH
integrates the latest display technologies such as HDMI, DisplayPort,
rd
Generation Core i7/ i5/ i3
２２
Advertisement
Table of Contents
