C&T Solution RCO-3000 Series User Manual page 77

Chapter 4: BIOS Setup
■ Serial Port 4 Configuration
 Serial Port
This item allows you to enable or disable serial port.
 Change Settings
This item allows you to change the address & IRQ settings of the specified serial port.
 Device Type Select
Change the Serial interface. Select <RS232> ,<RS422 Full Duplex> or <RS485 Half Duplex> interface.
■ Watch Dog Function
You can setup the system watch-dog timer, a hardware timer that generates a reset
when the software that it monitors does not respond as expected each time the watch
dog polls it.
 Watch Dog Timer Count Mode
Change the Watch dog mode. Select <Second Mode> or <Minute Mode> mode.
 Watch Dog Timer Time Out Value
User can set a value in the range of 0 to 255.
RCO-3000 | User's Manual
77