HIKVISION DS-2CE5AD8T-AVPIT3Z User Manual page 6

Note:
The supplied screw package contains self-tapping

screws, and expansion bolts.
For cement ceiling, expansion bolts are required to

fix the camera. For wooden ceiling, self-tapping
screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and video cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
8. Fit the bubble back to the camera.
9. Tighten the screws on the bubble of the dome
camera to finish the installation.
2.2 Wall Mounting of Type I and Type II Camera
Before you start:
You need to purchase a wall mount first.
Figure 2-3 Attach the Back Box
Figure 2-4 3-Axis Adjustment
Figure 2-5 Fit the Black Liner Back
Figure 2-6 Finish Installation