Travis Industries Fireplace Xtrordinair ProBuilder 54 Linear Installation Manual page 44

44
Thick Facing (Facing Thicker than 1-1/2")
If using thick facing, make sure to leave the thick facing guide in place.
Make sure to leave the screen assembly in the stock (fully in) position.
You may leave the screen assembly in place while installing thick facing. You may wish to
protect it with plastic (or other suitable material) to repel debris.
When using thick facing, make sure to install the facing above, below, and to the sides of the thick facing guide.
Do not allow any facing material to overlap the thick facing guide (this would prevent removal of the screen
assembly).
Screen Assembly Mount
THICK FACING GUIDE SIZE
Tile Stop to
Base of
Fireplace
5-1/4" (134mm)
© Travis Industries
Installation
Fireplace
Screen Assembly
Thick Facing Guide
THICK FACING GUIDE LOCATION (PB LINEAR)
Extends 5/8" (16mm) above the tile stop
Extends 5/8" (16mm) to the sides of the tile stop
Extends 3/8" (9.5mm) below the tile stop
Tile Stop Width
4-7/8"(124mm)
(for qualified installers only)
a
10/29/19 - 1453
Framing
Backerboard
Thick Facing
(brick, rock, etc.)
Tile Stop Height
PB42
Linear
b
PB54
Linear
PB 42 & 54 MV/GSB2/GSR2 Install
45" 20"
57" 20"