Endress+Hauser Tankvision Multi Scan NXA83B Operating Instructions Manual page 21

Tankvision
Endress+Hauser
Stow Command: Type
Value
0
2
3
Stow Command: Lock Test Inerval
Value
0
If the gauge command is servo (T) then the following items may be used to set any options:
Stow Command: Test Distance
Value
0
Stow Command: Test Tolerance
Value
0
Stow Command: Test Timeout
Value
0
If the gauge command is profile (V) then the following items may be used to set any options:
Profile Command: Topscan
Value
0
1
Profile Command: Scan Upwards
Value
0
1
Description
Stow Gauge to Top Limit Cut-out = Lock Test to Level
Stow Gauge to Top Limit Cut-out then return to Product Level
Lock Test to Level then return to Product Level
Description
Lock Test to Top Limit Cut-out, otherwise use interval in mm
Description
Use default 300 mm, otherwise use distance in mm
Description
Use default ±5 mm, otherwise use tolerance ± mm
Description
Use default 90 seconds, otherwise use timeout in seconds
Description
Tank (Full) Profile
Interface Profile (Topscan)
Description
Downwards Scan
Upwards Scan
OPC Server Namespace
21