Document Information; Target Audience For This Manual; Version History; Document Function - Endress+Hauser Tankvision Multi Scan NXA83B Operating Instructions Manual

Tankvision
Endress+Hauser
1

Document information

1.1

Target audience for this manual

This guide is for users of Tankvision system and OPC Servers/Clients. The intended audience
includes Project Engineers and System Administrators.
Beside basic PC operating knowledge no special training is needed to perform the Tank
Gauging System operations. Nevertheless it is recommended receiving a training on the
system by Endress+Hauser.
1.2

Version history

Document version
BA01289G/00/EN/01.14
BA01289G/00/EN/02.15
1.3

Document function

1.3.1 Used symbols
Safety symbols
Symbol Meaning
DANGER!
DANGER
This symbol alerts you to a dangerous situation. Failure to avoid this situation will
result in serious or fatal injury.
A0011189-EN
WARNING!
WARNING
This symbol alerts you to a dangerous situation. Failure to avoid this situation can
result in serious or fatal injury.
A0011190-EN
CAUTION!
CAUTION
This symbol alerts you to a dangerous situation. Failure to avoid this situation can
result in minor or medium injury.
A0011191-EN
NOTICE!
NOTICE
This symbol contains information on procedures and other facts which do not result
in personal injury.
A0011192-EN
Symbols for certain types of information
Symbol Meaning
Tip
Indicates additional information.
A0011193
Reference to page
Refers to the corresponding page number.
A0011195
2.
1.
, , ... Series of steps
Result of a sequence of actions
A0018373
Valid for SW version
3.0.10
3.0.12
Document information
Changes to the previous version
Initial version
Change of order code structure
3