Phone Call Displays And Alerts - Motorola APX 6000 User Manual

68012001079-JW
Chapter 4 : Status Indicators
You Hear Tone Name
Two High- GPS Fails
Pitched
Tones
Ringing Fast Ringing
Enhanced Call Sent
Phone Call Received
Gurgle Dynamic Regrouping
Talk Permit
Unique, New Message
Low-Pitch-
ed Chirp
Unique, Priority Status
High-Pitch-
ed Chirp
Incremen- Bluetooth Paired
tal- Pitched
Bluetooth Connected
Tone
Decremen- Bluetooth Unpaired
tal- Pitched
Bluetooth Disconnec-
Tone
ted
A Group of Fall Alert Continuous
Very High- Tone
Pitched
Tones
Critical Fall Alert Con-
tinuous Tone
Unique Enhanced Zone Bank
Low-High Up
Tone
Unique Enhanced Zone Bank
High-Low Down
Tone
4.8

Phone Call Displays and Alerts

The following phone call displays and alerts appears on the radio display when you make and receive
phone calls. The radio also uses alert tones to indicate the current status.
You Hear You See
A Long No phone
Tone
38
Heard
When the GPS fails or loses signal.
When system is searching for target of Private Call.
When waiting for target of Private Call to answer the
call.
When a land-to-mobile phone call is received.
(When PTT button is pressed) a dynamic ID has been
received.
(When PTT button is pressed) is verifying with the sys-
tem for accepting its transmissions.
When a new message is received.
When a priority message is received.
When Bluetooth accessory is paired with the radio.
When Bluetooth accessory is connected to the radio.
When Bluetooth accessory is unpaired from the radio.
When Bluetooth accessory is disconnected from the
radio.
When radio is in Fall Alert mode and prepares to trans-
mit Emergency Alarm when the timer of this alarm
ends.
When radio is in Fall Alert Enhanced mode and pre-
pares to transmit Emergency Alarm when the timer of
this alarm ends.
When EZB Up button is pressed to scroll the Enhance
Zone Bank up.
When EZB Down button is pressed to scroll the En-
hance Zone Bank down.
When
You press the PTT
button and the phone
Notes
Press to hang up. The radio re-
turns to the Home screen.