Selecting Or Changing The Ars Mode; User Login Feature; Logging In As A User - Motorola APX 6000 User Manual

68012001079-JW
Chapter 7 : Advanced Features
within the fixed network determine the presence of a device on the system and send data to the
device.
The ARS consists of the following mode:
• ARS Server Mode (Default mode)
• ARS Non-server Mode
7.16.1

Selecting or Changing the ARS Mode

When and where to use:
The following methods are options on how to select or change the ARS Mode. The result of all the
methods is the same. You can use the options interchangeably depending on your preference and the
programmed functions.
Procedure:
• Selecting or Changing the ARS mode using the 16-Position Select knob:
a. Once the zone you want is displayed, turn the preprogrammed 16-Position Select knob to
the desired mode.
• Selecting or Changing the ARS mode using the radio menu:
a. or to Chan .
b. Press the Menu Select button directly below Chan .
The display shows the current channel name.
c. or to the required channel or mode.
d. Press Sel to confirm the displayed channel.
One of the following scenarios occur:
• In ARS Server Mode, the display shows the zone and ARS server channel.
• In ARS Non-Server Mode, the display shows the zone and ARS non-server channel.
• If the channel or mode selected is unprogrammed, the display shows Unprogrammed.
7.16.2

User Login Feature

This feature allows you to take on a friendly username such as Text Messaging Service (TMS).
You can still send text messages without logging in as a user. The user login feature only enables the
recipient of your message to identify you as the sender by assigning a username to your message.
This feature is only applicable for Land Mobile Radio (LMR) Messaging.
NOTE: A predefined username that is set more than the maximum allowed characters is an
invalid name.
7.16.2.1

Logging In as a User

Procedure:
1 Perform one of the following actions:
• Press the preprogrammed User Login button.
82