Sending A Silent Emergency Alarm; Emergency Find Me; Receiving Emergency Beacons; Fireground - Motorola APX 6000 User Manual

If unsuccessful, a tone sounds to indicate that the selected channel does not support emergency
and rejects to launch emergency mode.
2 The microphone remains active for the hot mic time specified in your radio's codeplug
programming.
3 To exit Emergency Call, press and hold the preprogrammed Emergency button.
Turning off the radio also cancels the emergency state.
7.11.11

Sending a Silent Emergency Alarm

When and where to use: This feature allows you to send an Emergency Alarm to the system without
triggering any audio or visual indicators.
Procedure:
1 Press the preprogrammed Emergency button.
The display shows no changes, the LED does not light up, and you hear no tones. The silent
emergency state continues until you perform the next step.
2 Perform one of the following actions:
• Press and hold the preprogrammed Emergency button for about a second to exit the Silent
Emergency Alarm mode.
• Press and release the PTT button to exit the Silent Emergency Alarm mode and enter regular
dispatch or Emergency Call mode.
7.11.12

Emergency Find Me

When the radio is in Emergency mode, the Emergency Find Me feature transmits Bluetooth Low
Energy (BTLE) signals, and other emergency information to nearby radios.
For more information, contact your system administrator.
7.11.12.1

Receiving Emergency Beacons

When and where to use:
The receiving radio displays Beacon Received, the transmitting radio Contact ID, or alias. The
following methods are options on how to receive the beacon.
Procedure:
1 Perform one of the following:
• Tap Details to view the beacon list.
• Tap Dismiss to dismiss the beacon.
NOTE: If there are multiple beacons, the radio displays the recent beacon received.
7.12

Fireground

The portable Fireground Communications System is designed for deployment at an incident scene.
68012001079-JW
Chapter 7 : Advanced Features
77