INSTALLATION
WARNING: Before using this unit, please keep it upright for at least 3-4 hours.
This unit can easily be moved from one room to another.
While moving the unit please note that it must always be kept upright and then placed on an even surface.
3. Slide the Outlet adaptor into position on
the rear of the unit.
1.
Attach the fishtail connector to the end of
the hose, by extending the end of the hose
and twisting until firmly attached to the
connector (At least 3 full rotations).
2. Attach the Hose to the Outlet adaptor, in the
same way by extending the end of the hose
and twisting until firmly attached (At least 3
full rotations).
Make sure the unit is upright and there are no
4.
obstructions to the air inlets and outlet grills, with at
least 50cm of space to the sides and rear of the unit.
7