We recommend locating the service holes on
z
either side of the Dishwasher as shown.
If the holes are created through wood, ensure the
z
edges are smooth and rounded
If the holes are created through metal, ensure an
z
edge protector is fitted.
10
SERVICE ACCESS
SERVICE HOLE DIMENSIONS
A Maximum distance between rear of cavity and service hole*
B Maximum distance between floor and service hole**
C Minimum diameter of service hole
*based on a cabinetry depth of 580mm
**depending on adjustment of levelling feet
A
C
REAR
WALL
FLOOR
B
PROFILE
MM
15
0 - 50
70