1MRK 511 441-UEN Rev. C
Section 1
1.1
This manual
The communication protocol manual describes the communication protocols supported by the IED.
The manual concentrates on the vendor-specific implementations.
1.2
Intended audience
This manual is intended for the communication system engineer or system integrator responsible for
pre-engineering and engineering the communication setup in a substation from an IED perspective.
The system engineer or system integrator must have a basic knowledge of communication in
protection and control systems and thorough knowledge of the specific communication protocol.
1.3
Product documentation
1.3.1
Product documentation set
Engineering manual
Installation manual
Commissioning manual
Operation manual
Application manual
Technical manual
Communication
protocol manual
Cyber security
deployment guideline
IEC07000220 V4 EN-US
Figure 1:
Switchgear control unit SAM600-IO
Communication protocol manual
Introduction
The intended use of manuals throughout the product lifecycle
© 2017 - 2021 Hitachi Power Grids. All rights reserved
Section 1
Introduction
GUID-AB423A30-13C2-46AF-B7FE-A73BB425EB5F v20
GUID-C9B8127F-5748-4BEA-9E4F-CC762FE28A3A v11
GUID-3AA69EA6-F1D8-47C6-A8E6-562F29C67172 v16
IEC07000220-4-en.vsd
3