Connections; Things To Know Before Connecting Components - ProScan PSVR71 User Manual

Connections

Things to Know Before
Connecting Components
Protect Your Components
from Power Surges
• Connect all components before plugging any
power cords into the wall outlet.
• Always turn off the TV and other components
before you connect or disconnect any cables.
Position Cables Correctly to Avoid
Audio Hum or Interference
• Insert all cable plugs firmly into their jacks.
• Place the audio/video cables to the sides of the
TV's back panel instead of straight down the
middle after you connect your components.
• Try not to coil any twin-lead cables and keep
them away from the audio/video cables as much
as possible.
• Make sure all antennas and cables are properly
grounded. Refer to the Safety Tips sheet packed
with your unit.
Protect Your Components from
overheating
• Do not block ventilation holes in any of the
components. Arrange the components so that
air can circulate freely.
• Do not stack components.
• Allow adequate ventilation when placing your
components in a stand.
• Place an amplifier or satellite receiver on the
top shelf of the stand so heated air rising from it
will not flow around other components.
1
First Things First
2
Setting Up the VCR
3
VCR Basics
4
Recording
5
Program The Remote
5
6
Other Features
7
Connections
8
Reference
57