Ledj LEDJ352A User Manual page 13

IR remote functions:
01 - Sets the unit into blackout off/on (LED on/off)
02 - Sets the static colour (see chart key for colours)
A - Red D - White
B - Green E - Amber
C - Blue F - UV
03 - Runs the auto mode, use the 'Speed' button followed by
the ' ' and ' ' buttons to adjust the auto speed
04 - Runs the sound program, use the ' ' and ' ' buttons
to adjust the sound sensitivity
05 - Runs the strobe program, use the ' ' and ' ' buttons to
adjust the strobe speed
06 - Sets the auto/fade speed. Press this button followed by
the ' ' and ' ' buttons to adjust the program speed
07 - Sets the unit in either master or slave mode
08 - Runs the fade mode, use the 'Speed' button followed by
the ' ' and ' ' buttons to adjust the fade speed
09 - Sets the DMX address. Press this button followed by the
' ' and ' ' buttons to adjust the DMX address. Press this
button again followed by the ' ' and ' ' buttons to adjust
the DMX channel
10 - Sets the unit in full on. Press this button followed by the
' ' and ' ' buttons to adjust brightness (000-255)
11 - Sets the unit in Eco mode. Press this button followed by
the ' ' and ' ' buttons to turn eco mode on/off
12 - Adjusts the auto, fade and strobe speed, sound
sensitivity, DMX address/channel, full on brightness and
turns the eco mode on/off.
www.prolight.co.uk
G - Orange
H - Cyan
01
I - Pink
03
04
06
09
10
Operating instructions
ON/OFF
Auto Sound Strob
Speed M/S Fade
Add Full
Red Green Blue
A B
White Amber
D E
Org Cyan Pink
G H
Rapid QB1 HEX User Manual
12
05
08
07
Eco
11
C
UV
02
F
I
13