Ledj LEDJ352A User Manual page 12

Battery reference information:
When the battery charge indicator LED is illuminated red, the fixture is recharging.
When the battery charge indicator LED is illuminated yellow, the fixture has less than 30% charge.
When the battery charge indicator LED is illuminated green, the battery is charged.
The recharging time for the battery is 5 hours when the unit is powered off and 9 hours when the unit
is powered on.
The battery usage time from fully charged is dependant on the mode and brightness of the fixture.
For more information please see the features on page 3.
Eco mode:
To set the fixture into eco mode, press the "MENU" button and use the "UP" and "DOWN" buttons on
the front of the unit to show
and "DOWN" buttons to choose between
To exit out of any of the above options, press the "MENU" button.
Please note: Eco mode allows the fixture to run longer from a single charge when used in a 3 or more
colour program with a slight reduction in intensity.
Fixture temperature:
To display the fixture temperature, press the "MENU" button and use the "UP" and "DOWN" buttons on
the front of the unit to show
temperature will be displayed. To exit out of any of the above options, press the "MENU" button.
IR remote:
To turn the IR remote function on/off, press the "MENU" button to show
press the "ENTER" button and use the "UP" and "DOWN" buttons to choose between
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Please note: The fixture must be set to Master for the IR function to work.
Reset factory settings:
To reset the units factory settings, press the "MENU" and "ENTER" buttons together, the unit will show
uAit
on the LED display. The unit will now reset to the factory default settings.
www.prolight.co.uk
ECo
on the LED display. Now press the "ENTER" button and use the "UP"
on ofF
or
tENP
on the LED display. Press the "ENTER" button and the fixture
Operating instructions Operating instructions
. Press the "ENTER" button to confirm the setting.
ir
on the LED display. Now
Rapid QB1 HEX User Manual
on oFF
or .
12